karayanik
18-01-2009, 15:39
linux pc ye newcs server kurmaya çalışıyorum 4 port ve 4 kart var logları aşağıya kopy paste yaptım
[ 15:03:02 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0
[ 15:03:02 ] [ Phoenix ] Setting Baud to custom 16129
[ 15:03:03 ] [ Phoenix ] Normal RESET on node /dev/ttyS0
[ 15:03:05 ] [ Loader ] Unknown card
[ 15:03:05 ] [ Loader ] Trying Irdeto (T=14)
[ 15:03:05 ] [ Loader ] Reader type 2 on node /dev/ttyS0
[ 15:03:05 ] [ Phoenix ] Opening device /dev/ttyS0
[ 15:03:05 ] [ Phoenix ] Setting Parity to: ODD
[ 15:03:05 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0
[ 15:03:05 ] [ Phoenix ] Setting Baud to standard 9600
[ 15:03:05 ] [ Phoenix ] Normal RESET on node /dev/ttyS0
[ 15:03:07 ] [ ATR ] T=0 1etu=62.00us Guardtime:12etu WWT:9600etu
[ 15:03:07 ] [ ATR ] Historical bytes: 0 B 0 0
[ 15:03:07 ] [ Loader ] Init Conax card
[ 15:03:07 ] [ Phoenix ] Setting Parity to: EVEN
[ 15:03:07 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0
[ 15:03:07 ] [ Phoenix ] Setting Baud to custom 16129
[ 15:03:07 ] [ Loader ] Card 0B00 on port /dev/ttyS0 failed
[ 15:03:07 ] [ Loader ] Starting Newcamd Server on port 50000
[ 15:03:07 ] [ Newcamd ] Newcamd thread Server started on port 50000
[ 15:03:07 ] bind: error! 98: Address already in use
[ 15:03:07 ] [ Loader ] Reader type 2 on node /dev/ttyS1
[ 15:03:07 ] [ Phoenix ] Opening device /dev/ttyS1
[ 15:03:07 ] [ Phoenix ] Setting Parity to: ODD
[ 15:03:07 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS1
[ 15:03:07 ] [ Phoenix ] Setting Baud to standard 9600
[ 15:03:08 ] [ Phoenix ] Normal RESET on node /dev/ttyS1
[ 15:03:10 ] [ ATR ] T=0 1etu=8.68us Guardtime:12etu WWT:115200etu
[ 15:03:10 ] [ ATR ] Historical bytes: [C2] G @ [00] h [90] [00]
[ 15:03:10 ] [ Loader ] Init Viaccess card
[ 15:03:10 ] [ Phoenix ] Setting Parity to: ODD
[ 15:03:10 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS1
[ 15:03:10 ] [ Phoenix ] Setting Baud to standard 9600
[ 15:03:10 ] [ KeymaN ] Adding key 000000c65f3cb4 type 0 on Provider 000000 for caid 0500 ID=0
[ 15:03:10 ] [ KeymaN ] Adding key 000000c65f3cb4 type 1 on Provider FFF400 for caid 0500 ID=0
[ 15:03:10 ] [ KeymaN ] Adding key 000000c65f3cb4 type 1 on Provider 032000 for caid 0500 ID=1
[ 15:03:11 ] [ KeymaN ] Adding key 000000c65f3cb4 type 1 on Provider 032010 for caid 0500 ID=2
[ 15:03:11 ] [ Loader ] Card 0500 on port /dev/ttyS1 ready
[ 15:03:11 ] [ Loader ] Starting Newcamd Server on port 51000
[ 15:03:11 ] [ Newcamd ] Newcamd thread Server started on port 51000
[ 15:03:11 ] bind: error! 98: Address already in use
[ 15:03:11 ] [ Loader ] Reader type 2 on node /dev/ttyS2
[ 15:03:11 ] [ Phoenix ] Opening device /dev/ttyS2
[ 15:03:11 ] [ Phoenix ] Setting Parity to: ODD
[ 15:03:11 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS2
[ 15:03:11 ] [ Phoenix ] Setting Baud to standard 9600
[ 15:03:11 ] [ Phoenix ] Normal RESET on node /dev/ttyS2
[ 15:03:13 ] [ ATR ] T=14 1etu=175.01us Guardtime:17etu WWT:9600etu
[ 15:03:13 ] [ ATR ] Historical bytes: I R D E T O A C S V 4 . 1
[ 15:03:13 ] [ Loader ] Init Irdeto card
[ 15:03:13 ] [ Phoenix ] Setting Parity to: NONE
[ 15:03:13 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS2
[ 15:03:13 ] [ Phoenix ] Setting Baud to custom 5713
[ 15:03:13 ] [ Loader ] Card 0600 on port /dev/ttyS2 failed
[ 15:03:13 ] [ Loader ] Starting Newcamd Server on port 52000
[ 15:03:13 ] [ Newcamd ] Newcamd thread Server started on port 52000
[ 15:03:13 ] bind: error! 98: Address already in use
[ 15:03:13 ] [ Loader ] Reader type 2 on node /dev/ttyS3
[ 15:03:13 ] [ Phoenix ] Opening device /dev/ttyS3
[ 15:03:13 ] [ Phoenix ] Setting Parity to: ODD
[ 15:03:13 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS3
[ 15:03:13 ] [ Phoenix ] Setting Baud to standard 9600
[ 15:03:14 ] [ Phoenix ] Normal RESET on node /dev/ttyS3
[ 15:03:16 ] [ ATR ] T=0 1etu=8.68us Guardtime:12etu WWT:115200etu
[ 15:03:16 ] [ ATR ] Historical bytes: [C2] G @ [00] h [90] [00]
[ 15:03:16 ] [ Loader ] Init Viaccess card
[ 15:03:16 ] [ Phoenix ] Setting Parity to: ODD
[ 15:03:16 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS3
[ 15:03:16 ] [ Phoenix ] Setting Baud to standard 9600
[ 15:03:16 ] [ KeymaN ] Adding key 000000bfb6a406 type 0 on Provider 000000 for caid 0500 ID=0
[ 15:03:16 ] [ KeymaN ] Adding key 000000bfb6a406 type 1 on Provider FFFD00 for caid 0500 ID=0
[ 15:03:16 ] [ KeymaN ] Adding key 000000bfb6a406 type 1 on Provider 023B00 for caid 0500 ID=1
[ 15:03:16 ] [ Loader ] Card 0500 on port /dev/ttyS3 ready
[ 15:03:16 ] [ Loader ] Starting Newcamd Server on port 53000
[ 15:03:16 ] [ Newcamd ] Newcamd thread Server started on port 53000
[ 15:03:16 ] bind: error! 98: Address already in use
[ 15:03:16 ] [ NewCS ] Ready to GO! :)
root@karay-desktop:~# bind: error! 98: Address already in use
-bash: bind:: command not found
root@karay-desktop:~# killall newcs
NEWCS Exitted...
root@karay-desktop:~# /bin/newcs
This is NewCS 1.63 - the New CardServer by the Butter-team..
Compiled on Jan 14 2009 at 19:52:09
Reading Config file from /etc/newcs.xml
TCP-log password is enabled, set to: NewCSpwd
TCP-log set to simple mode
level: normal
type: init
output: console,tcp
logger config: level 1 type 3 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 15:11:44 ] [ Box detect ] Box type 1 (General Boxtype - PC compatible)
[ 15:11:44 ] [ Config ] Option <blockc0> for device 0 (Phoenix Interface) not present, defaulting to NO
[ 15:11:44 ] [ Config ] Value in <ipk> for device 0 (Phoenix Interface) is INVALID, skipping...
[ 15:11:44 ] [ Config ] Value in <ucpk> for device 0 (Phoenix Interface) is INVALID, skipping...
[ 15:11:44 ] [ Config ] Pincode for device 0 (Phoenix Interface): 0000
[ 15:11:44 ] [ Config ] /dev/ttyS0 ECM priority: round
[ 15:11:44 ] [ Config ] Option <blockc0> for device 1 (Phoenix Interface) not present, defaulting to NO
[ 15:11:44 ] [ Config ] Option <crypto-special> for device 1 (Phoenix Interface) not present, defaulting to NO
[ 15:11:44 ] [ Config ] Pincode for device 1 (Phoenix Interface): 0000
[ 15:11:44 ] [ Config ] /dev/ttyS1 ECM priority: round
[ 15:11:44 ] [ Config ] Option <blockc0> for device 2 (Phoenix Interface) not present, defaulting to NO
[ 15:11:44 ] [ Config ] Option <crypto-special> for device 2 (Phoenix Interface) not present, defaulting to NO
[ 15:11:44 ] [ Config ] Pincode for device 2 (Phoenix Interface): 0000
[ 15:11:44 ] [ Config ] /dev/ttyS2 ECM priority: round
[ 15:11:44 ] [ Config ] Option <blockc0> for device 3 (Phoenix Interface) not present, defaulting to NO
[ 15:11:44 ] [ Config ] Option <crypto-special> for device 3 (Phoenix Interface) not present, defaulting to NO
[ 15:11:44 ] [ Config ] Pincode for device 3 (Phoenix Interface): 0000
[ 15:11:44 ] [ Config ] /dev/ttyS3 ECM priority: round
[ 15:11:44 ] [ httpd ] httpd-user: newcs, password: newcs, accesslevel: admin
[ 15:11:44 ] [ EMM Cache ] Initialising dynamic Cache
[ 15:11:44 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 5531
[ 15:11:44 ] [ Loader ] Starting Telnet on port 1001
[ 15:11:44 ] bind: error! 98: Address already in use
Can't create server: Address already in use
[ 15:11:44 ] [ Loader ] Reader type 2 on node /dev/ttyS0
[ 15:11:44 ] [ Phoenix ] Opening device /dev/ttyS0
[ 15:11:44 ] [ Phoenix ] Setting Parity to: ODD
[ 15:11:44 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0
[ 15:11:44 ] [ Phoenix ] Setting Baud to custom 16129
[ 15:11:45 ] [ Phoenix ] Normal RESET on node /dev/ttyS0
[ 15:11:47 ] [ Loader ] Unknown card
[ 15:11:47 ] [ Loader ] Trying Irdeto (T=14)
[ 15:11:47 ] [ Loader ] Reader type 2 on node /dev/ttyS0
[ 15:11:47 ] [ Phoenix ] Opening device /dev/ttyS0
[ 15:11:47 ] [ Phoenix ] Setting Parity to: ODD
[ 15:11:47 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0
[ 15:11:47 ] [ Phoenix ] Setting Baud to standard 9600
[ 15:11:48 ] [ Phoenix ] Normal RESET on node /dev/ttyS0
[ 15:11:49 ] [ ATR ] T=0 1etu=62.00us Guardtime:12etu WWT:9600etu
[ 15:11:49 ] [ ATR ] Historical bytes: 0 B 0 0
[ 15:11:49 ] [ Loader ] Init Conax card
[ 15:11:49 ] [ Phoenix ] Setting Parity to: EVEN
[ 15:11:49 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0
[ 15:11:49 ] [ Phoenix ] Setting Baud to custom 16129
[ 15:11:49 ] [ Loader ] Card 0B00 on port /dev/ttyS0 failed
[ 15:11:49 ] [ Loader ] Starting Newcamd Server on port 50000
[ 15:11:49 ] [ Newcamd ] Newcamd thread Server started on port 50000
[ 15:11:49 ] bind: error! 98: Address already in use
[ 15:11:49 ] [ Loader ] Reader type 2 on node /dev/ttyS1
[ 15:11:49 ] [ Phoenix ] Opening device /dev/ttyS1
[ 15:11:49 ] [ Phoenix ] Setting Parity to: ODD
[ 15:11:49 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS1
[ 15:11:49 ] [ Phoenix ] Setting Baud to standard 9600
[ 15:11:50 ] [ Phoenix ] Normal RESET on node /dev/ttyS1
[ 15:11:52 ] [ ATR ] T=0 1etu=8.68us Guardtime:12etu WWT:115200etu
[ 15:11:52 ] [ ATR ] Historical bytes: [C2] G @ [00] h [90] [00]
[ 15:11:52 ] [ Loader ] Init Viaccess card
[ 15:11:52 ] [ Phoenix ] Setting Parity to: ODD
[ 15:11:52 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS1
[ 15:11:52 ] [ Phoenix ] Setting Baud to standard 9600
[ 15:11:52 ] [ KeymaN ] Adding key 000000c65f3cb4 type 0 on Provider 000000 for caid 0500 ID=0
[ 15:11:52 ] [ KeymaN ] Adding key 000000c65f3cb4 type 1 on Provider FFF400 for caid 0500 ID=0
[ 15:11:52 ] [ KeymaN ] Adding key 000000c65f3cb4 type 1 on Provider 032000 for caid 0500 ID=1
[ 15:11:53 ] [ KeymaN ] Adding key 000000c65f3cb4 type 1 on Provider 032010 for caid 0500 ID=2
[ 15:11:53 ] [ Loader ] Card 0500 on port /dev/ttyS1 ready
[ 15:11:53 ] [ Loader ] Starting Newcamd Server on port 51000
[ 15:11:53 ] [ Newcamd ] Newcamd thread Server started on port 51000
[ 15:11:53 ] bind: error! 98: Address already in use
[ 15:11:53 ] [ Loader ] Reader type 2 on node /dev/ttyS2
[ 15:11:53 ] [ Phoenix ] Opening device /dev/ttyS2
[ 15:11:53 ] [ Phoenix ] Setting Parity to: ODD
[ 15:11:53 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS2
[ 15:11:53 ] [ Phoenix ] Setting Baud to standard 9600
[ 15:11:53 ] [ Phoenix ] Normal RESET on node /dev/ttyS2
[ 15:11:55 ] [ ATR ] T=14 1etu=175.01us Guardtime:17etu WWT:9600etu
[ 15:11:55 ] [ ATR ] Historical bytes: I R D E T O A C S V 4 . 1
[ 15:11:55 ] [ Loader ] Init Irdeto card
[ 15:11:55 ] [ Phoenix ] Setting Parity to: NONE
[ 15:11:55 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS2
[ 15:11:55 ] [ Phoenix ] Setting Baud to custom 5713
[ 15:11:55 ] [ Loader ] Card 0600 on port /dev/ttyS2 failed
[ 15:11:55 ] [ Loader ] Starting Newcamd Server on port 52000
[ 15:11:55 ] [ Newcamd ] Newcamd thread Server started on port 52000
[ 15:11:55 ] bind: error! 98: Address already in use
[ 15:11:55 ] [ Loader ] Reader type 2 on node /dev/ttyS3
[ 15:11:55 ] [ Phoenix ] Opening device /dev/ttyS3
[ 15:11:55 ] [ Phoenix ] Setting Parity to: ODD
[ 15:11:55 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS3
[ 15:11:55 ] [ Phoenix ] Setting Baud to standard 9600
[ 15:11:56 ] [ Phoenix ] Normal RESET on node /dev/ttyS3
[ 15:11:58 ] [ ATR ] T=0 1etu=8.68us Guardtime:12etu WWT:115200etu
[ 15:11:58 ] [ ATR ] Historical bytes: [C2] G @ [00] h [90] [00]
[ 15:11:58 ] [ Loader ] Init Viaccess card
[ 15:11:58 ] [ Phoenix ] Setting Parity to: ODD
[ 15:11:58 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS3
[ 15:11:58 ] [ Phoenix ] Setting Baud to standard 9600
[ 15:11:58 ] [ KeymaN ] Adding key 000000bfb6a406 type 0 on Provider 000000 for caid 0500 ID=0
[ 15:11:58 ] [ KeymaN ] Adding key 000000bfb6a406 type 1 on Provider FFFD00 for caid 0500 ID=0
[ 15:11:58 ] [ KeymaN ] Adding key 000000bfb6a406 type 1 on Provider 023B00 for caid 0500 ID=1
[ 15:11:58 ] [ Loader ] Card 0500 on port /dev/ttyS3 ready
[ 15:11:58 ] [ Loader ] Starting Newcamd Server on port 53000
[ 15:11:58 ] [ Newcamd ] Newcamd thread Server started on port 53000
[ 15:11:58 ] bind: error! 98: Address already in use
[ 15:11:58 ] [ NewCS ] Ready to GO! :)
root@karay-desktop:~# ] bind: error! 98: Address already in use
-bash: ]: command not found
buda kulandığım xml config
<?xml version="1.0"?>
<!--
For setup-issues, look in readme.txt!
If there are other troubles, try different forums or irc channels around :o)
The configfile are NOT case-sensitive, and shouldnt care about dos/unix cr/lf.
** This is the example file for Dreambox/TD etc. that use SCI interfaces.
-->
<newCSconfig>
<readers name="Card Readers">
<device>
<name>Phoenix Interface</name>
<type>Phoenix</type>
<mhz>600</mhz>
<node>/dev/ttyS0</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<!-- <boxkey>0000000000</boxkey> -->
<!-- <rsa>0000000000</rsa> -->
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 000000</ipk>
<ucpk>00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>50000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
<device>
<name>Phoenix Interface</name>
<type>Phoenix</type>
<mhz>357</mhz>
<node>/dev/ttyS1</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<!-- <boxkey>0000000000</boxkey> -->
<!-- <rsa>0000000000</rsa> -->
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>51000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
<device>
<name>Phoenix Interface</name>
<type>Phoenix</type>
<mhz>357</mhz>
<node>/dev/ttyS2</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<!-- <boxkey></boxkey> -->
<!-- <rsa></rsa> -->
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>52000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
<device>
<name>Phoenix Interface</name>
<type>Phoenix</type>
<mhz>357</mhz>
<node>/dev/ttyS3</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<!-- <boxkey></boxkey> -->
<!-- <rsa></rsa> -->
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>53000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
</readers>
<radegastserver>
<enabled>No</enabled>
<port>16000</port>
<allow>
<hostname>localhost</hostname>
</allow>
</radegastserver>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<httpd>
<server> <!-- Port to accept connections on -->
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>
<!-- valid value for userfile are:
Any username you'd like - Used for browser to logon (its case sensitive). -->
<name>newcs</name>
<!-- valid value for password are:
Any password you'd like - Used for browser to logon (its case sensitive). -->
<password>newcs</password>
<!-- valid value for accesslevel are:
admin, stats - Define what rights the user has in the web-console -->
<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<password>NewCSpwd</password>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>kara</name>
<password>yanik</password>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
<rate>2</rate>
</user>
<user>
<name>galata</name>
<password>saray</password>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
<rate>2</rate>
</user>
</newcamdserver>
</newCSconfig>
bu sorunları nasıl çözebilirim yardımlarınızı bekliyorum tşk.ler
[ 15:03:02 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0
[ 15:03:02 ] [ Phoenix ] Setting Baud to custom 16129
[ 15:03:03 ] [ Phoenix ] Normal RESET on node /dev/ttyS0
[ 15:03:05 ] [ Loader ] Unknown card
[ 15:03:05 ] [ Loader ] Trying Irdeto (T=14)
[ 15:03:05 ] [ Loader ] Reader type 2 on node /dev/ttyS0
[ 15:03:05 ] [ Phoenix ] Opening device /dev/ttyS0
[ 15:03:05 ] [ Phoenix ] Setting Parity to: ODD
[ 15:03:05 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0
[ 15:03:05 ] [ Phoenix ] Setting Baud to standard 9600
[ 15:03:05 ] [ Phoenix ] Normal RESET on node /dev/ttyS0
[ 15:03:07 ] [ ATR ] T=0 1etu=62.00us Guardtime:12etu WWT:9600etu
[ 15:03:07 ] [ ATR ] Historical bytes: 0 B 0 0
[ 15:03:07 ] [ Loader ] Init Conax card
[ 15:03:07 ] [ Phoenix ] Setting Parity to: EVEN
[ 15:03:07 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0
[ 15:03:07 ] [ Phoenix ] Setting Baud to custom 16129
[ 15:03:07 ] [ Loader ] Card 0B00 on port /dev/ttyS0 failed
[ 15:03:07 ] [ Loader ] Starting Newcamd Server on port 50000
[ 15:03:07 ] [ Newcamd ] Newcamd thread Server started on port 50000
[ 15:03:07 ] bind: error! 98: Address already in use
[ 15:03:07 ] [ Loader ] Reader type 2 on node /dev/ttyS1
[ 15:03:07 ] [ Phoenix ] Opening device /dev/ttyS1
[ 15:03:07 ] [ Phoenix ] Setting Parity to: ODD
[ 15:03:07 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS1
[ 15:03:07 ] [ Phoenix ] Setting Baud to standard 9600
[ 15:03:08 ] [ Phoenix ] Normal RESET on node /dev/ttyS1
[ 15:03:10 ] [ ATR ] T=0 1etu=8.68us Guardtime:12etu WWT:115200etu
[ 15:03:10 ] [ ATR ] Historical bytes: [C2] G @ [00] h [90] [00]
[ 15:03:10 ] [ Loader ] Init Viaccess card
[ 15:03:10 ] [ Phoenix ] Setting Parity to: ODD
[ 15:03:10 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS1
[ 15:03:10 ] [ Phoenix ] Setting Baud to standard 9600
[ 15:03:10 ] [ KeymaN ] Adding key 000000c65f3cb4 type 0 on Provider 000000 for caid 0500 ID=0
[ 15:03:10 ] [ KeymaN ] Adding key 000000c65f3cb4 type 1 on Provider FFF400 for caid 0500 ID=0
[ 15:03:10 ] [ KeymaN ] Adding key 000000c65f3cb4 type 1 on Provider 032000 for caid 0500 ID=1
[ 15:03:11 ] [ KeymaN ] Adding key 000000c65f3cb4 type 1 on Provider 032010 for caid 0500 ID=2
[ 15:03:11 ] [ Loader ] Card 0500 on port /dev/ttyS1 ready
[ 15:03:11 ] [ Loader ] Starting Newcamd Server on port 51000
[ 15:03:11 ] [ Newcamd ] Newcamd thread Server started on port 51000
[ 15:03:11 ] bind: error! 98: Address already in use
[ 15:03:11 ] [ Loader ] Reader type 2 on node /dev/ttyS2
[ 15:03:11 ] [ Phoenix ] Opening device /dev/ttyS2
[ 15:03:11 ] [ Phoenix ] Setting Parity to: ODD
[ 15:03:11 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS2
[ 15:03:11 ] [ Phoenix ] Setting Baud to standard 9600
[ 15:03:11 ] [ Phoenix ] Normal RESET on node /dev/ttyS2
[ 15:03:13 ] [ ATR ] T=14 1etu=175.01us Guardtime:17etu WWT:9600etu
[ 15:03:13 ] [ ATR ] Historical bytes: I R D E T O A C S V 4 . 1
[ 15:03:13 ] [ Loader ] Init Irdeto card
[ 15:03:13 ] [ Phoenix ] Setting Parity to: NONE
[ 15:03:13 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS2
[ 15:03:13 ] [ Phoenix ] Setting Baud to custom 5713
[ 15:03:13 ] [ Loader ] Card 0600 on port /dev/ttyS2 failed
[ 15:03:13 ] [ Loader ] Starting Newcamd Server on port 52000
[ 15:03:13 ] [ Newcamd ] Newcamd thread Server started on port 52000
[ 15:03:13 ] bind: error! 98: Address already in use
[ 15:03:13 ] [ Loader ] Reader type 2 on node /dev/ttyS3
[ 15:03:13 ] [ Phoenix ] Opening device /dev/ttyS3
[ 15:03:13 ] [ Phoenix ] Setting Parity to: ODD
[ 15:03:13 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS3
[ 15:03:13 ] [ Phoenix ] Setting Baud to standard 9600
[ 15:03:14 ] [ Phoenix ] Normal RESET on node /dev/ttyS3
[ 15:03:16 ] [ ATR ] T=0 1etu=8.68us Guardtime:12etu WWT:115200etu
[ 15:03:16 ] [ ATR ] Historical bytes: [C2] G @ [00] h [90] [00]
[ 15:03:16 ] [ Loader ] Init Viaccess card
[ 15:03:16 ] [ Phoenix ] Setting Parity to: ODD
[ 15:03:16 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS3
[ 15:03:16 ] [ Phoenix ] Setting Baud to standard 9600
[ 15:03:16 ] [ KeymaN ] Adding key 000000bfb6a406 type 0 on Provider 000000 for caid 0500 ID=0
[ 15:03:16 ] [ KeymaN ] Adding key 000000bfb6a406 type 1 on Provider FFFD00 for caid 0500 ID=0
[ 15:03:16 ] [ KeymaN ] Adding key 000000bfb6a406 type 1 on Provider 023B00 for caid 0500 ID=1
[ 15:03:16 ] [ Loader ] Card 0500 on port /dev/ttyS3 ready
[ 15:03:16 ] [ Loader ] Starting Newcamd Server on port 53000
[ 15:03:16 ] [ Newcamd ] Newcamd thread Server started on port 53000
[ 15:03:16 ] bind: error! 98: Address already in use
[ 15:03:16 ] [ NewCS ] Ready to GO! :)
root@karay-desktop:~# bind: error! 98: Address already in use
-bash: bind:: command not found
root@karay-desktop:~# killall newcs
NEWCS Exitted...
root@karay-desktop:~# /bin/newcs
This is NewCS 1.63 - the New CardServer by the Butter-team..
Compiled on Jan 14 2009 at 19:52:09
Reading Config file from /etc/newcs.xml
TCP-log password is enabled, set to: NewCSpwd
TCP-log set to simple mode
level: normal
type: init
output: console,tcp
logger config: level 1 type 3 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 15:11:44 ] [ Box detect ] Box type 1 (General Boxtype - PC compatible)
[ 15:11:44 ] [ Config ] Option <blockc0> for device 0 (Phoenix Interface) not present, defaulting to NO
[ 15:11:44 ] [ Config ] Value in <ipk> for device 0 (Phoenix Interface) is INVALID, skipping...
[ 15:11:44 ] [ Config ] Value in <ucpk> for device 0 (Phoenix Interface) is INVALID, skipping...
[ 15:11:44 ] [ Config ] Pincode for device 0 (Phoenix Interface): 0000
[ 15:11:44 ] [ Config ] /dev/ttyS0 ECM priority: round
[ 15:11:44 ] [ Config ] Option <blockc0> for device 1 (Phoenix Interface) not present, defaulting to NO
[ 15:11:44 ] [ Config ] Option <crypto-special> for device 1 (Phoenix Interface) not present, defaulting to NO
[ 15:11:44 ] [ Config ] Pincode for device 1 (Phoenix Interface): 0000
[ 15:11:44 ] [ Config ] /dev/ttyS1 ECM priority: round
[ 15:11:44 ] [ Config ] Option <blockc0> for device 2 (Phoenix Interface) not present, defaulting to NO
[ 15:11:44 ] [ Config ] Option <crypto-special> for device 2 (Phoenix Interface) not present, defaulting to NO
[ 15:11:44 ] [ Config ] Pincode for device 2 (Phoenix Interface): 0000
[ 15:11:44 ] [ Config ] /dev/ttyS2 ECM priority: round
[ 15:11:44 ] [ Config ] Option <blockc0> for device 3 (Phoenix Interface) not present, defaulting to NO
[ 15:11:44 ] [ Config ] Option <crypto-special> for device 3 (Phoenix Interface) not present, defaulting to NO
[ 15:11:44 ] [ Config ] Pincode for device 3 (Phoenix Interface): 0000
[ 15:11:44 ] [ Config ] /dev/ttyS3 ECM priority: round
[ 15:11:44 ] [ httpd ] httpd-user: newcs, password: newcs, accesslevel: admin
[ 15:11:44 ] [ EMM Cache ] Initialising dynamic Cache
[ 15:11:44 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 5531
[ 15:11:44 ] [ Loader ] Starting Telnet on port 1001
[ 15:11:44 ] bind: error! 98: Address already in use
Can't create server: Address already in use
[ 15:11:44 ] [ Loader ] Reader type 2 on node /dev/ttyS0
[ 15:11:44 ] [ Phoenix ] Opening device /dev/ttyS0
[ 15:11:44 ] [ Phoenix ] Setting Parity to: ODD
[ 15:11:44 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0
[ 15:11:44 ] [ Phoenix ] Setting Baud to custom 16129
[ 15:11:45 ] [ Phoenix ] Normal RESET on node /dev/ttyS0
[ 15:11:47 ] [ Loader ] Unknown card
[ 15:11:47 ] [ Loader ] Trying Irdeto (T=14)
[ 15:11:47 ] [ Loader ] Reader type 2 on node /dev/ttyS0
[ 15:11:47 ] [ Phoenix ] Opening device /dev/ttyS0
[ 15:11:47 ] [ Phoenix ] Setting Parity to: ODD
[ 15:11:47 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0
[ 15:11:47 ] [ Phoenix ] Setting Baud to standard 9600
[ 15:11:48 ] [ Phoenix ] Normal RESET on node /dev/ttyS0
[ 15:11:49 ] [ ATR ] T=0 1etu=62.00us Guardtime:12etu WWT:9600etu
[ 15:11:49 ] [ ATR ] Historical bytes: 0 B 0 0
[ 15:11:49 ] [ Loader ] Init Conax card
[ 15:11:49 ] [ Phoenix ] Setting Parity to: EVEN
[ 15:11:49 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0
[ 15:11:49 ] [ Phoenix ] Setting Baud to custom 16129
[ 15:11:49 ] [ Loader ] Card 0B00 on port /dev/ttyS0 failed
[ 15:11:49 ] [ Loader ] Starting Newcamd Server on port 50000
[ 15:11:49 ] [ Newcamd ] Newcamd thread Server started on port 50000
[ 15:11:49 ] bind: error! 98: Address already in use
[ 15:11:49 ] [ Loader ] Reader type 2 on node /dev/ttyS1
[ 15:11:49 ] [ Phoenix ] Opening device /dev/ttyS1
[ 15:11:49 ] [ Phoenix ] Setting Parity to: ODD
[ 15:11:49 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS1
[ 15:11:49 ] [ Phoenix ] Setting Baud to standard 9600
[ 15:11:50 ] [ Phoenix ] Normal RESET on node /dev/ttyS1
[ 15:11:52 ] [ ATR ] T=0 1etu=8.68us Guardtime:12etu WWT:115200etu
[ 15:11:52 ] [ ATR ] Historical bytes: [C2] G @ [00] h [90] [00]
[ 15:11:52 ] [ Loader ] Init Viaccess card
[ 15:11:52 ] [ Phoenix ] Setting Parity to: ODD
[ 15:11:52 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS1
[ 15:11:52 ] [ Phoenix ] Setting Baud to standard 9600
[ 15:11:52 ] [ KeymaN ] Adding key 000000c65f3cb4 type 0 on Provider 000000 for caid 0500 ID=0
[ 15:11:52 ] [ KeymaN ] Adding key 000000c65f3cb4 type 1 on Provider FFF400 for caid 0500 ID=0
[ 15:11:52 ] [ KeymaN ] Adding key 000000c65f3cb4 type 1 on Provider 032000 for caid 0500 ID=1
[ 15:11:53 ] [ KeymaN ] Adding key 000000c65f3cb4 type 1 on Provider 032010 for caid 0500 ID=2
[ 15:11:53 ] [ Loader ] Card 0500 on port /dev/ttyS1 ready
[ 15:11:53 ] [ Loader ] Starting Newcamd Server on port 51000
[ 15:11:53 ] [ Newcamd ] Newcamd thread Server started on port 51000
[ 15:11:53 ] bind: error! 98: Address already in use
[ 15:11:53 ] [ Loader ] Reader type 2 on node /dev/ttyS2
[ 15:11:53 ] [ Phoenix ] Opening device /dev/ttyS2
[ 15:11:53 ] [ Phoenix ] Setting Parity to: ODD
[ 15:11:53 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS2
[ 15:11:53 ] [ Phoenix ] Setting Baud to standard 9600
[ 15:11:53 ] [ Phoenix ] Normal RESET on node /dev/ttyS2
[ 15:11:55 ] [ ATR ] T=14 1etu=175.01us Guardtime:17etu WWT:9600etu
[ 15:11:55 ] [ ATR ] Historical bytes: I R D E T O A C S V 4 . 1
[ 15:11:55 ] [ Loader ] Init Irdeto card
[ 15:11:55 ] [ Phoenix ] Setting Parity to: NONE
[ 15:11:55 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS2
[ 15:11:55 ] [ Phoenix ] Setting Baud to custom 5713
[ 15:11:55 ] [ Loader ] Card 0600 on port /dev/ttyS2 failed
[ 15:11:55 ] [ Loader ] Starting Newcamd Server on port 52000
[ 15:11:55 ] [ Newcamd ] Newcamd thread Server started on port 52000
[ 15:11:55 ] bind: error! 98: Address already in use
[ 15:11:55 ] [ Loader ] Reader type 2 on node /dev/ttyS3
[ 15:11:55 ] [ Phoenix ] Opening device /dev/ttyS3
[ 15:11:55 ] [ Phoenix ] Setting Parity to: ODD
[ 15:11:55 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS3
[ 15:11:55 ] [ Phoenix ] Setting Baud to standard 9600
[ 15:11:56 ] [ Phoenix ] Normal RESET on node /dev/ttyS3
[ 15:11:58 ] [ ATR ] T=0 1etu=8.68us Guardtime:12etu WWT:115200etu
[ 15:11:58 ] [ ATR ] Historical bytes: [C2] G @ [00] h [90] [00]
[ 15:11:58 ] [ Loader ] Init Viaccess card
[ 15:11:58 ] [ Phoenix ] Setting Parity to: ODD
[ 15:11:58 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS3
[ 15:11:58 ] [ Phoenix ] Setting Baud to standard 9600
[ 15:11:58 ] [ KeymaN ] Adding key 000000bfb6a406 type 0 on Provider 000000 for caid 0500 ID=0
[ 15:11:58 ] [ KeymaN ] Adding key 000000bfb6a406 type 1 on Provider FFFD00 for caid 0500 ID=0
[ 15:11:58 ] [ KeymaN ] Adding key 000000bfb6a406 type 1 on Provider 023B00 for caid 0500 ID=1
[ 15:11:58 ] [ Loader ] Card 0500 on port /dev/ttyS3 ready
[ 15:11:58 ] [ Loader ] Starting Newcamd Server on port 53000
[ 15:11:58 ] [ Newcamd ] Newcamd thread Server started on port 53000
[ 15:11:58 ] bind: error! 98: Address already in use
[ 15:11:58 ] [ NewCS ] Ready to GO! :)
root@karay-desktop:~# ] bind: error! 98: Address already in use
-bash: ]: command not found
buda kulandığım xml config
<?xml version="1.0"?>
<!--
For setup-issues, look in readme.txt!
If there are other troubles, try different forums or irc channels around :o)
The configfile are NOT case-sensitive, and shouldnt care about dos/unix cr/lf.
** This is the example file for Dreambox/TD etc. that use SCI interfaces.
-->
<newCSconfig>
<readers name="Card Readers">
<device>
<name>Phoenix Interface</name>
<type>Phoenix</type>
<mhz>600</mhz>
<node>/dev/ttyS0</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<!-- <boxkey>0000000000</boxkey> -->
<!-- <rsa>0000000000</rsa> -->
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 000000</ipk>
<ucpk>00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>50000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
<device>
<name>Phoenix Interface</name>
<type>Phoenix</type>
<mhz>357</mhz>
<node>/dev/ttyS1</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<!-- <boxkey>0000000000</boxkey> -->
<!-- <rsa>0000000000</rsa> -->
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>51000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
<device>
<name>Phoenix Interface</name>
<type>Phoenix</type>
<mhz>357</mhz>
<node>/dev/ttyS2</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<!-- <boxkey></boxkey> -->
<!-- <rsa></rsa> -->
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>52000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
<device>
<name>Phoenix Interface</name>
<type>Phoenix</type>
<mhz>357</mhz>
<node>/dev/ttyS3</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<!-- <boxkey></boxkey> -->
<!-- <rsa></rsa> -->
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>53000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
</readers>
<radegastserver>
<enabled>No</enabled>
<port>16000</port>
<allow>
<hostname>localhost</hostname>
</allow>
</radegastserver>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<httpd>
<server> <!-- Port to accept connections on -->
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>
<!-- valid value for userfile are:
Any username you'd like - Used for browser to logon (its case sensitive). -->
<name>newcs</name>
<!-- valid value for password are:
Any password you'd like - Used for browser to logon (its case sensitive). -->
<password>newcs</password>
<!-- valid value for accesslevel are:
admin, stats - Define what rights the user has in the web-console -->
<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<password>NewCSpwd</password>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>kara</name>
<password>yanik</password>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
<rate>2</rate>
</user>
<user>
<name>galata</name>
<password>saray</password>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
<rate>2</rate>
</user>
</newcamdserver>
</newCSconfig>
bu sorunları nasıl çözebilirim yardımlarınızı bekliyorum tşk.ler