Konu Kapatılmıştır
1 den 2´e kadar. Toplam 2 Sayfa bulundu

Konu: TSreader Full Sürümler

  1. #1
    serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Sep 2007
    Mesajlar
    1.242
    Post Thanks / Like
    Teşekkür
    898
    Thanked 5.591 Times in 868 Posts
    Tecrübe Puanı
    2468

    TSreader Full Sürümler

    .
    .

    TSReader v2.8.47c Standard



    Sevgili arkadaşlar,


    Ayrıntılı transponder analizine imkan veren TSReader 'in kurulum aşamalarını izah etmeye çalışacağım.

    Önce, TSreader sürüm farklarına göz atalım ;

    [Only registered and activated users can see links. ]

    Resimden görüldüğü üzere, Lite sürümlerinde kullanım özellikleri oldukça kısıtlıdır.

    Örneğin; Yukarıdaki özellik tablosunda, 13ncü satırda; "Records the transport stream( *.ts ) to a file" yani kaydetme özelliğinin "lite" sürümde olmadığı anlaşılmaktadır. Verdiğim örnek gibi, lite sürümde olmayan özelliklerden herhangi biri kullanılmak isteniyorsa, Standart yada Profesyonel sürümlerden birini edinmek zaruri olmaktadır. ( Kullanıcılar, TSreader ile en azından kayıt yapılabilsin diye, cracklenmiş TSReader v2.8.47c Standard sürümü'nü aşağıya ekledim. )



    1. TSReader 'i aşağıdan indirip, C:\ altına kuruyoruz.
    ( Burası önemli ! Program Files(x86) altına kurmayın, direkt C:\ altına kurunuz )


    2. Kurulumda program kısa yol eklemediyse, C:\TSReader\ içinden TSReader.exe dosyasını bulup, sağ klik, masaüstüne kısayol ekle yapıyoruz.


    3. Gelen bu ekranda, listeden TV kartımızı seçmeliyiz.
    ( Burası önemli ! TV kartının modelini yanlış seçerseniz, TSReader çalışmadan hata verip kapanacaktır. )



    TV KARTI SEÇİM RESİMLERİ :

    Prof Tuners 7301 TV kartı kullandığım için, TV kartının seçim satırı, resimde görüldüğü gibidir ;
    ( Resimlerin üzerine tıkladığınızda, resim büyüyecektir !... )



    Program çok akıllı !... Eğer doğru TV kartını seçtiyseniz, TSReader bir sonraki defa çalıştırıp, herhangi bir frekans analizinden sonra, File > Select source... girip, TV kartımızın bulunduğu satıra gelecek olursak, TSReader TV kartının tam model tanımını da oluşturmaktadır.




    ÖNEMLİ : TSReader ile frekans analizine başlamadan önce, C:\TSReader\Satellites\ *.ini dosyaları içinde kayıtlı frekansları tek tek güncelleyiniz. Yani kullanılan bütün frekanslar canlı frekanslar olmalıdır. Canlı frekansları elle tek tek güncellerken, flysat'tan yararlanabilirsiniz. EĞER YALNIZCA CANLI FREKANSLARI GİRMEZSENİZ TSReader SİNYAL OLMAYAN FREKANSLARDA HATA VERİR !



    DISEQC SWITCH SEÇİMLERİ :
    ( TSReader'in bu sürümü yalnızca Diseqc 1.0 protokolünü destekler !... Yani en fazla 4 girişli diesqc kullanmanız gerekecektir. ( TSreader v2.8.5.1 Standard sürümünden itibaren diseqc 1.1 desteği vardır. ) )







    ANALİZ EKRANI VE PARAMETRELER :

    Diseqc Port 1 : Türksat ;



    Diseqc Port 2 : Hotbird ;



    Diseqc Port 3 : Eutelsat 70,5E ;



    Diseqc Port 4 : Eutelsat 7A ;




    VLC ile açmak için; Playback sekmesini açıp, VLC seçilip, açılan setting penceresinden, VLC'nin kurulum klasöründeki, VLC.exe dosyası gösterilip kaydedilmelidir. Sonra yandaki küçük resim pencerelerine çift tıklandığında, ilgili kanal VLC ile açılacaktır.

    Başka bir frekansın analizini yapmak için; File sekmesinden Restart Source 'e tıklanırsa, TSreader'i kapatmadan başka bir frekansın analizine geçmek mümkün olacaktır.



    TSreader v2.8.47c Standart sürümünde, biss şifreli kanalları açmak ;

    * TSreader'i kurduktan sonra, biss şifreli kanalları açmak için, MDPlugins klasörünü, klasörü ile birlikte kurulum klasörü içine atınız.

    * TSreader ile biss şifreli kanala geldiğinizde, plugins sekmesinden, biss plugin pencerisini açıp, 12 haneli biss key'i giriniz.



    TSreader Version 2.8, build 47c

    * Pro: The warning that's displayed when ending archiving mode can now be disabled
    * Pro: Added an option to terminate TSReader once archive mode is terminated
    * Pro: Added an option when clicking a profile in the profile-browser to launch the profile without command-line parameters
    * All: Added support for the HDHomeRun Prime Cable Card receiver
    * Pro: Fixed a bug in the archive Disk Transfer utility which caused the video file to not be deleted from the source drive
    * All: Fixed a problem with setting the default VLC path on non-English or 64-bit Windows
    * Pro: UDP forwarder now accepts domain names in addition to IP addresses
    * All: Added decoding of the ATSC Genre descriptor
    * Pro: New look to the Disk Transfer utility
    * Std/Pro: Added -2 switch to force the "Allow PC to Sleep" option on
    * Pro: The UDP forwarder can now use a TTL of zero
    * All: Added the ability to export the subscription status on the HDHomeRun Prime tuner to a comma-separated file
    * All: Fixed an issue with the HDHomeRun Prime not resuming the stream after a power cycle or network interruption
    * All: Added support for UTF-8 encoded ISO 10646 character sets
    * All: Updated the Service Type table to reflect the latest ETSI specification
    * All: Fixed an issue with multiple extended event description descriptors causing characters to be lost
    * All: Added an option to show the video first in the Program Usage chart
    * All: Updated Dektec and Sencore source modules for compatibility with their latest drivers
    * All: Current program text from the EPG is only shown on video thumbnails
    * Std/Pro: The Table Viewer now shows multiple tables carried in the same section
    * Pro: Fixes to cure a once every two week issue with channels being archived going encrypted when being recorded from an HDHomeRun Prime
    * Pro: Added option to not save thumbnails when running archive mode
    * All: Added decoding of the ATSC service_type, hidden & hide_guide fields from the TVCT & CVCT
    * Pro: Increased the number of archive channels from 32 to 96
    * Pro: Forwarder now displays channel names correctly
    * Pro: Fixed an issue with deleting newly created profiles
    * All: If multiple Dektec devices are found, TSReader now shows a dialog allowing selection of the device.
    * All: The DektecUSB source module is now depreciated and will be automatically removed by TSReader. Use the Dektec source module for all Dektec devices
    * All: Support for Chinese & Korean character sets
    * All: Fixed an issue with the TVCT Extended Channel Descriptor when Huffman coded
    * Std/Pro: Added support for UTF-8 character sets in XML, XMLTV and HTML exports.
    * Std/Pro: Added "-4 ISO-8859-1" and "-4 UTF-8" command-line switches to select XML/XMLTV & HTML export character set
    * Std/Pro: Added "-M h" switch to run TSReader hidden. You must use command-line parameters if you specify this switch.
    * Pro: Fixed an issue when using the archive function where channels swapped to 30 minute recordings because of lack of EPG wouldn't switch back to EPG mode automatically.
    * All: TSReader now includes source modules from TBS. The command-line parsing bug these source modules had is now fixed Thanks to the guys at TBS for their help

    * Pro: Lots of improvements to the Archive Viewer. Added the ability to attach notes to a recording, print a list of recordings and Closed Caption extraction and viewing
    * Lite: H.264 thumbnails are now generated!
    * All: Added input support for Stream Labs ASI cards. Only one card is supported at present
    * Pro: Added forwarder support for the ITW-9507 low-cost DVB-T modulator
    * Pro: Fixed an issue with CEA-708 captions specifically when using 3D extensions
    * All: SCTE-65 support completed
    * All: Multiple ATSC descriptors of the same type in the EIT are now displayed correctly.
    * All: Added DVB-S2 support to the Alitronika AT-660 series receivers.
    * All: Fixed an issue with PMTs being placed on PIDs 0x1ffb & 0x1ffc (reserved for ATSC & SCTE).
    * All: 16:9 thumbnails now have the correct aspect ratio in the TSReader thumbnail display
    * Std/Pro: Control Server RECORD command now includes the elapsed recording time in its response
    * Std/Pro: Thumbnail generation for most video types can be disabled by setting the Maximum Pictures value to zero in the Settings/Thumbnail Thread/Refresh Rate & Maximum Pictures dialog
    * Std/Pro: Control Server PROGRAM command now indicates if a service is scrambled
    * All: The DVB BIT outputs non-Latin characters correctly now
    * Std/Pro: Added the -4 switch to select XML and HTML export chararcter-sets
    * Std/Pro: Added the -5 switch to set and enable the EIT language filter.
    * All: Changed the processing of the DVB EIT extended event descriptor to prevent character loss on some streams.




    **Hidden Content: Reply or Thanks to see the content**
    Konu serkanguzel tarafından (13-04-2018 Saat 20:40 ) değiştirilmiştir.
    Doğru bilginin adresi...

    Geneli ingilendiren sorulara PM'den yanıt veremiyorum. Katılımcıların yararlanabilmesi için,
    sorularımızı açık alandan sormaya özen göstermeliyiz. Anlayışınız için şimdiden teşekkürler.

  2. Likes ViaHussun, Salih.özkoc35, mirturk, x 1 liked this post
  3. The Following 25 Users Say Thank You to serkanguzel For This Useful Post:

    + Show/Hide list of the thanked

    1907amigo (16-08-2016), abe_yeneli (04-06-2018), alatemur (15-04-2017), atlas (01-06-2016), azimli (31-05-2016), dijitalxyz (22-06-2016), djmnyk (13-07-2021), JDavid22 (27-07-2023), karakobra (01-10-2017), magician (02-10-2016), metinus (30-12-2017), mirturk (22-10-2017), montevo (03-06-2019), otokoc (11-06-2016), pire (27-11-2017), Ramboide (31-03-2018), rupestris (10-02-2017), Salih.özkoc35 (27-01-2017), shtlx (06-06-2016), skystar_2 (18-10-2016), ViaHussun (02-06-2016), vvasi (31-05-2016), x 1 (06-06-2016), xpto25 (02-02-2023), zyadas (06-06-2016)

  4. #2
    serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Sep 2007
    Mesajlar
    1.242
    Post Thanks / Like
    Teşekkür
    898
    Thanked 5.591 Times in 868 Posts
    Tecrübe Puanı
    2468
    .
    .

    TSreader v2.8.53a




    Version 2.8, build 53a ;


    * All: Fixed a crash with some Dektec devices
    * All: Fixed a memory leak when the H.264 decoder fails
    * All: Fixed an issue where TSReader would set the wrong VLC directory path on 64-bit operating systems
    * All: In the UDP, RTP and HRTP source module stream selection dialog, the friendly name for the network adapter is now shown
    * Pro: The stream monitor filename can now be set. If left blank, TSReader uses its default name which is StreamMonitor-yyyymmdd.txt in the TSReader folder
    * All: The TBS 5590 source modules now show the signal level in dBm, the carrier-to-noise ratio in dB and the bit-error-rate (BER)
    * All: The ISDB-T tuner dialog now allows selection between the channel numbers used in the Americas and Japan
    * All: A new TBS 5590 source module is included that supports variable symbol rate QAM-B signals. The default QAM-B source module uses the two fixed symbol rates used for 64QAM and 256QAM modes that's supported in North America
    * Pro: Added the ability to print TSWatcher error reports
    * Pro: Added the + option to the -N switch to allow the Stream Monitor log filename to be specified


    Dosyayı temin ederek bizlere ulaştıran @Viahussun ustaya teşekkür ederiz.

    TSReader v2.8.53a( orijinal dosya, full sürüm olarak çalışmaktadır )
    **Hidden Content: Reply or Thanks to see the content**
    Konu serkanguzel tarafından (22-12-2018 Saat 17:35 ) değiştirilmiştir.
    Doğru bilginin adresi...

    Geneli ingilendiren sorulara PM'den yanıt veremiyorum. Katılımcıların yararlanabilmesi için,
    sorularımızı açık alandan sormaya özen göstermeliyiz. Anlayışınız için şimdiden teşekkürler.

  5. Likes ViaHussun, xpto25 liked this post
  6. The Following 15 Users Say Thank You to serkanguzel For This Useful Post:

    + Show/Hide list of the thanked

    abe_yeneli (27-12-2020), akelon (05-06-2023), Bilinmeyen (07-09-2019), bulentster (03-12-2022), clubrotation (26-12-2021), dijitalxyz (25-04-2021), djmnyk (13-07-2021), erol029 (20-10-2021), hotbord_34 (20-12-2018), JDavid22 (27-07-2023), metinus (17-10-2020), ViaHussun (22-12-2018), vvasi (20-12-2018), x 1 (12-02-2020), xpto25 (02-02-2023)

Konu Kapatılmıştır

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Tags for this Thread

Bookmarks

Yetkileriniz

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
TOPlist TopSat.Org