Konu Kapatılmıştır
Sayfa 1 Toplam 2 Sayfadan
1 2 SonuncuSonuncu
1 den 10´e kadar. Toplam 15 Sayfa bulundu

Konu: DVBViewer Demo Sürümler

  1. #1
    serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Sep 2007
    Mesajlar
    1.242
    Post Thanks / Like
    Teşekkür
    898
    Thanked 5.591 Times in 868 Posts
    Tecrübe Puanı
    2468

    DVBViewer Demo Sürümler

    En son çıkan sürümler için son mesaja gidiniz !

    .
    .

    Selam arkadaşlar,


    DVBViewer Pro son çıkan sürümlerini eskisi gibi bulamıyoruz.

    Demo sürümlerinde ise, önceki sürümleri bulamıyoruz. Çünkü son demo sürümü yayınlanınca, eski demo sürümler official web sayfasından kaldırılmaktadır.

    Bütün demo sürümleri elimizin altında olsun diye, v5.6.4 sürümünden başlamak üzere, bu konu başlığından paylaşacağım.

    Demo sürümlerde, bazı özelliklerin bulunmaması yada kısıtlı olduğu unutulmamalıdır !




    DVBViewer v5.6.4 Demo





    En son çıkan sürümler için son mesaja gidiniz !

    **Hidden Content: Reply or Thanks to see the content**


    En son çıkan sürümler için son mesaja gidiniz !
    Konu serkanguzel tarafından (15-04-2017 Saat 21:18 ) değiştirilmiştir.
    Doğru bilginin adresi...

    Geneli ingilendiren sorulara PM'den yanıt veremiyorum. Katılımcıların yararlanabilmesi için,
    sorularımızı açık alandan sormaya özen göstermeliyiz. Anlayışınız için şimdiden teşekkürler.

  2. The Following 4 Users Say Thank You to serkanguzel For This Useful Post:

    csakilee (07-05-2017), hotbord_34 (04-11-2017), nasre (22-08-2018), tertip77 (28-06-2018)

  3. #2
    serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Sep 2007
    Mesajlar
    1.242
    Post Thanks / Like
    Teşekkür
    898
    Thanked 5.591 Times in 868 Posts
    Tecrübe Puanı
    2468
    En son çıkan sürümler için son mesaja gidiniz !

    .
    .

    DVBViewer v6.0.0 Demo




    En son çıkan sürümler için son mesaja gidiniz !

    **Hidden Content: Reply or Thanks to see the content**


    En son çıkan sürümler için son mesaja gidiniz !
    Konu serkanguzel tarafından (20-05-2017 Saat 00:04 ) değiştirilmiştir.
    Doğru bilginin adresi...

    Geneli ingilendiren sorulara PM'den yanıt veremiyorum. Katılımcıların yararlanabilmesi için,
    sorularımızı açık alandan sormaya özen göstermeliyiz. Anlayışınız için şimdiden teşekkürler.

  4. The Following 10 Users Say Thank You to serkanguzel For This Useful Post:

    67sefa (12-04-2017), csakilee (07-05-2017), dz-hack (12-04-2017), hotbord_34 (04-11-2017), irfanyu (22-04-2017), karciliadem (14-04-2017), nasre (22-08-2018), tertip77 (28-06-2018), tokersari (12-04-2017), vvasi (12-04-2017)

  5. #3
    serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Sep 2007
    Mesajlar
    1.242
    Post Thanks / Like
    Teşekkür
    898
    Thanked 5.591 Times in 868 Posts
    Tecrübe Puanı
    2468
    En son çıkan sürümler için son mesaja gidiniz !

    .
    .

    DVBViewer v6.0.2 Demo





    En son çıkan sürümler için son mesaja gidiniz !

    **Hidden Content: Reply or Thanks to see the content**


    En son çıkan sürümler için son mesaja gidiniz !
    Konu serkanguzel tarafından (30-07-2017 Saat 12:39 ) değiştirilmiştir.
    Doğru bilginin adresi...

    Geneli ingilendiren sorulara PM'den yanıt veremiyorum. Katılımcıların yararlanabilmesi için,
    sorularımızı açık alandan sormaya özen göstermeliyiz. Anlayışınız için şimdiden teşekkürler.

  6. The Following 4 Users Say Thank You to serkanguzel For This Useful Post:

    commando (25-05-2017), csakilee (15-05-2018), hotbord_34 (04-11-2017), nasre (22-08-2018)

  7. #4
    serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Sep 2007
    Mesajlar
    1.242
    Post Thanks / Like
    Teşekkür
    898
    Thanked 5.591 Times in 868 Posts
    Tecrübe Puanı
    2468
    En son çıkan sürümler için son mesaja gidiniz !

    .
    .

    DVBViewer v6.0.3 Demo





    En son çıkan sürümler için son mesaja gidiniz !

    **Hidden Content: Reply or Thanks to see the content**


    En son çıkan sürümler için son mesaja gidiniz !
    Konu serkanguzel tarafından (04-11-2017 Saat 12:00 ) değiştirilmiştir.
    Doğru bilginin adresi...

    Geneli ingilendiren sorulara PM'den yanıt veremiyorum. Katılımcıların yararlanabilmesi için,
    sorularımızı açık alandan sormaya özen göstermeliyiz. Anlayışınız için şimdiden teşekkürler.

  8. The Following 3 Users Say Thank You to serkanguzel For This Useful Post:

    hotbord_34 (04-11-2017), nasre (22-08-2018), tertip77 (28-06-2018)

  9. #5
    serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Sep 2007
    Mesajlar
    1.242
    Post Thanks / Like
    Teşekkür
    898
    Thanked 5.591 Times in 868 Posts
    Tecrübe Puanı
    2468
    En son çıkan sürümler için son mesaja gidiniz !

    .
    .

    DVBViewer v6.0.4 Demo





    En son çıkan sürümler için son mesaja gidiniz !

    **Hidden Content: Reply or Thanks to see the content**


    En son çıkan sürümler için son mesaja gidiniz !
    Konu serkanguzel tarafından (30-04-2018 Saat 11:08 ) değiştirilmiştir.
    Doğru bilginin adresi...

    Geneli ingilendiren sorulara PM'den yanıt veremiyorum. Katılımcıların yararlanabilmesi için,
    sorularımızı açık alandan sormaya özen göstermeliyiz. Anlayışınız için şimdiden teşekkürler.

  10. The Following 5 Users Say Thank You to serkanguzel For This Useful Post:

    aksumetin (06-11-2017), csakilee (28-08-2018), hotbord_34 (04-11-2017), nasre (22-08-2018), vvasi (04-11-2017)

  11. #6
    serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Sep 2007
    Mesajlar
    1.242
    Post Thanks / Like
    Teşekkür
    898
    Thanked 5.591 Times in 868 Posts
    Tecrübe Puanı
    2468
    En son çıkan sürümler için son mesaja gidiniz !

    .
    .

    DVBViewer v6.1.0 Demo



    Change Log DVBViewer Demo 6.1.0

    • Added: Recorder Options: Separate radio recording format setting. The default is pure MP2 / MP3 / AAC / AC3 audio without TS containers depending on the broadcasted format. The previous general recording format setting now only applies to TV recording and has been renamed accordingly.
    • Removed: Recorder Options: “Adjusted PAT/PMT” checkbox. It is still available as tweak (launch Tweaker.exe for changing it) and switched on by default. It makes sure that the table of contents in TS files specifies the recorded, not the broadcasted elements (like audio tracks, teletext, subtitles), in order to avoid issues with other players than DVBViewer.
    • Added: Timer Recordings: The lead and follow-up time can now be specified / edited individually per timer in the Timer Recordings Window and the corresponding OSD dialog (default skin only). Transferring these values to / receiving them from the DVBViewer Media Server is now fully supported.
    • Change: Timer Recordings: The description and channel IDare now stored as Unicode in the file timers.xml . Please note: This may cause compatibility issues (garbled non-ASCII characters) when reverting to a version before 6.0.4.0.
    • Fix: Recorder: Filename schemes containing backslashes could result in file paths with double backslashes and cause follow-up issues.
    • Fix/Change: Recorder: Better error handling in case of a Service ID in the channel list data that does not match the Service ID in the received data (which previously disabled “all audio tracks” recording).
    • Change/Fix: Recording Database: On database recreation / refresh reading the EPG Info files (.txt) now precedes reading the NTFS file properties of recordings (previously the other way round). This and other measures avoid messedup duration values that were not stored and processed correctly in the past.
    • Change: EPG Window: Parts have been restructured and unified/simplified. The search bar and the button for showing/hiding it are now placed at the bottom. The time bar has been removed. The contained elements (date & time input, Now Button) are now permanently visible at the top. There is one uniform context menu for all tabs (previously three different menus). Time related menu items like “Time +/-” or “Evening” now apply to all tabs (previously only to “EPG at...” and “Timeline”). The additional navigation bar at the top of the TV Guide tab has been removed. The functionality is covered by the permanently visible time navigation and the context menu.
    • Fix: EPG Window: After sorting the content of the “EPG at...” tab by clicking a column title the Details panel showed the wrong EPG item (not the selected one, see [Only registered and activated users can see links. ]). Additionally numerous functional bugs and inconsistencies have been fixed.
    • Added: UPnP Window: Buttons for copying the URL of UPnP items to the clipboard, playing an item and transferring the displayed items to the DVBViewer playlist, so they can be played successively without having to start the playback of each item individually.
    • Fix: UPnP Window: The window was not able to display Unicode characters, that are not contained in the local character set.
    • Fix: UPnP / OSD: Some flaws on OSD Menu → htpcHome → UPnP, particularly the missing help via OSD Blue (F8) and the non-working automatic display of discovered UPnP servers. The page remained empty unless the user pressed OSD Yellow (F7).
    • Added: Subtitles: Ability to obtain SRT subtitle files associated with video files from the DVBViewer Media Server (requires DMS version 2.1 or later). This also applies to Playback → UPnP Server. They appear in the Settings → Subtitles menu.
    • Added: Subtitles: Ability to recognize multiple SRT files for different languages that are associated with a video file, provided the SRT filenames follow the usual naming convention. If the video filename is movie.mkv, recognized SRT subtitle file names are movie.srt, movie.eng.srt, movie.ger.srt etc. They all appear in the Settings → Subtitles menu.
    • Fix: Subtitles: Several issues concerning SRT subtitles. SRT files with UTF-8 BOM bytes couldn't be read. The subtitle update frequency was too low (once per second) causing bad sync with video and omitted subtitles on fast changes.
    • Fix: Subtitles: DVBViewer did not handle video files with both internal (embedded) and external SRT subtitles correctly (see [Only registered and activated users can see links. ]).
    • Fix: Subtitle Options: The slider for adjusting the background transparency of SRT subtitles didn't take effect.
    • Added: Teletext Options: Sliders for adjusting the background transparency and outline thickness of teletext subtitles.
    • Added: Hardware Options:The complete device name is displayed as hint on mouse over if it exceeds the list box width.
    • Fix: Hardware: The connection timeout configured for virtual TS Stream devices was ignored internally.
    • Change: Hardware: “No hardware available” error message replaced in the English language file by the more meaningful “"There is no matching DVB device available for this channel!" (see [Only registered and activated users can see links. ]).
    • Fix: HbbTV/MHEG5: Measure to enable the coexistence of HbbTV and MHEG services for the same channel. OSD Red (F5) preferably activates HbbTV, if available and enabled. The OSD main menu allows to select HbbTV or MHEG5 (by Christian).
    • Fix: Channel List Views: If the grouping was set to Root + Frequency empty category names were displayed for TS Stream channels (because they have no frequency).
    • Fix: Main Window: Enabling/Disabling the Playback → Playback Rate menu item in the main window did not work as intended. It is supposed to be enabled on DVD playback (except for DVD menus) and for file playback without the DVBViewer Filter.
    • Change/Fix: Media Server Options: The method for sending Wake On LAN to the server PC now conforms more to the standard expected by network devices.
    • Fix: General: The “User Data Error” message box appeared without text. After clicking OK DVBViewer was not terminated properly, but was still running invisibly and had to be terminated with the task manager (see [Only registered and activated users can see links. ]).
    • Updated: DVBViewer Filter to version 3.9.6 (H.264 format detection enhancements particularly for handling problems with H.264 baseline profile and the LAV Video Decoder in DXVA2 Native mode).
    • Updated: Default satellite transponder lists, default satellite and internet channel lists.





    En son çıkan sürümler için son mesaja gidiniz !

    **Hidden Content: Reply or Thanks to see the content**


    En son çıkan sürümler için son mesaja gidiniz !
    Konu serkanguzel tarafından (15-05-2018 Saat 13:57 ) değiştirilmiştir.
    Doğru bilginin adresi...

    Geneli ingilendiren sorulara PM'den yanıt veremiyorum. Katılımcıların yararlanabilmesi için,
    sorularımızı açık alandan sormaya özen göstermeliyiz. Anlayışınız için şimdiden teşekkürler.

  12. Likes nasre liked this post
  13. The Following 5 Users Say Thank You to serkanguzel For This Useful Post:

    abe_yeneli (01-05-2018), csakilee (15-05-2018), nasre (30-04-2018), tertip77 (28-06-2018), vvasi (30-04-2018)

  14. #7
    serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Sep 2007
    Mesajlar
    1.242
    Post Thanks / Like
    Teşekkür
    898
    Thanked 5.591 Times in 868 Posts
    Tecrübe Puanı
    2468
    En son çıkan sürümler için son mesaja gidiniz !

    .
    .

    DVBViewer v6.1.1 Demo




    Change Log DVBViewer Demo 6.1.1


    Fix: EPG Window: The Timeline tab was not updated to “now” when opening the EPG Window. On EPG updates the Timeline view did not keep its vertical scroll state, but jumped to a position where the last selected channel was visible. Additionally the timeline view did not immediately respond to changes in the timer list by displaying scheduled items in red. In certain cases the date displayed at the top did not match the content of the TV Guide tab.

    Fix: Channel Editor: The Direct Address button for retrieving the direct URL of a stream without redirections remained hidden in case of HTTPS URLs.

    Added: Recorder: SDT data in recordings in addition to EPG data (if configured) enabling VLC to read the EPG.

    Fix: Media Server Client: If the configured Media Server address was a name instead of an IP address (except “localhost”), DVBViewer did not resolve it before comparing it with the sender IP address of received Media Server broadcasts/multicasts, thus erroneously discarding prompts for updating the timer and recording list.

    Added: Hardware: Support for Elgato Netstream 4C devices.




    En son çıkan sürümler için son mesaja gidiniz !

    **Hidden Content: Reply or Thanks to see the content**


    En son çıkan sürümler için son mesaja gidiniz !
    Konu serkanguzel tarafından (23-07-2019 Saat 09:28 ) değiştirilmiştir.
    Doğru bilginin adresi...

    Geneli ingilendiren sorulara PM'den yanıt veremiyorum. Katılımcıların yararlanabilmesi için,
    sorularımızı açık alandan sormaya özen göstermeliyiz. Anlayışınız için şimdiden teşekkürler.

  15. The Following 8 Users Say Thank You to serkanguzel For This Useful Post:

    csakilee (15-05-2018), mystic (30-07-2018), nasre (15-05-2018), skorpios268 (23-05-2018), tartar10 (13-10-2018), tertip77 (28-06-2018), vvasi (15-05-2018), zyadas (15-05-2018)

  16. #8
    serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Sep 2007
    Mesajlar
    1.242
    Post Thanks / Like
    Teşekkür
    898
    Thanked 5.591 Times in 868 Posts
    Tecrübe Puanı
    2468
    En son çıkan sürümler için son mesaja gidiniz !

    .
    .

    DVBViewer v6.1.2 Demo






    Change Log DVBViewer Demo 6.1.2

    • Removed: Recording: Writing the EPG data of recordings as NTFS file properties has been dropped. However, reading file properties on recording data base updates (if there is no EPG information file) is still supported.
    • Fix: Timer Recordings Window: Timers could not be edited if the channel was excluded by the filter options of the channel list on the left.
    • Fix: Timer Recordings Window:The timer end time was not displayed if the additional follow-up time exceeded midnight (e.g. 23:55 + 10 minutes).
    • Fix: Timer Recordings- and EPG-Window: Up/Down buttons in time input fields were displayed too wide if Windows was configured for a large text size (see [Only registered and activated users can see links. ]).
    • Fix: EPG Window: The “EPG at...” tab did not respond to time selection (e.g. the Now button) if it displayed search results.
    • Added: EPG Window: A pipe character '|' between search items is interpreted as a logical OR, which means, a search for Tom|Jim|Joe will yield search results that contain the name Tom, Jim or Joe. As before blanks between search items are interpreted as logical AND. Thus a search for Tom Jim Joe yields results that contain all three names. AND and OR can be combined: Tom Jim|Joe yields results that contain Tom and Jim or Joe.
    • Change/Fix: EPG: New strategy for handling arriving EPG data in relation to already present data that enhances the EPG update behavior. Additionally potential access violations after EPG data deletion were fixed.
    • Fix/Change: TV/Radio Options: Channel switching with the mouse wheel (see Options → Input → Mouse) only caused MiniEPG changes if “Browse in MiniEPG” was enabled. The “Browse in MiniPG” and “Channel plus/minus switching delay” settings are not mutual exclusive anymore, so the latter can be enabled for channel switching with the mouse even if “Browse in MiniEPG” is enabled for channel switching via keyboard.
    • Change: Wake on LAN: DVBViewer now sends the WOL magic packet via all available network cards (previously the choice was up to Windows), in order to avoid problems with multihomed PCs.
    • Fix: Scanner: Several channels on Astra 28.2° E, 12207 V were erroneously flagged as data channels due to “hide channel duplicates without Freesat EPG” measures.
    • Added: Hardware: Basic support for Unicable 2 (JESS). Options → Hardware → Unicable allows to configure a device for the conventional (EN 50494) or the advanced (EN 50607) Unicable system, that supports up to 32 user bands (slots) and more than 2 satellite positions.
    • Added: Hardware: Support for DigiBest ISDB-T devices (unencrypted channels only, see [Only registered and activated users can see links. ]).
    • Fix: Hardware: Tuning ATSC frequencies with Hauppauge WinTV-HVR 950Q did not work (see [Only registered and activated users can see links. ]).
    • Added: Hardware: Support for Freenet (SMiT USB Dongle) DVB-T2 Sticks
    • Change/Fix: Downloader: Several enhancements and fixes particularly concerning the handling of errors, HTTPS and user name/password.





    En son çıkan sürümler için son mesaja gidiniz !

    **Hidden Content: Reply or Thanks to see the content**


    En son çıkan sürümler için son mesaja gidiniz !
    Konu serkanguzel tarafından (23-07-2019 Saat 09:28 ) değiştirilmiştir.
    Doğru bilginin adresi...

    Geneli ingilendiren sorulara PM'den yanıt veremiyorum. Katılımcıların yararlanabilmesi için,
    sorularımızı açık alandan sormaya özen göstermeliyiz. Anlayışınız için şimdiden teşekkürler.

  17. The Following 4 Users Say Thank You to serkanguzel For This Useful Post:

    abe_yeneli (23-08-2018), nasre (22-08-2018), tartar10 (13-10-2018), vvasi (22-08-2018)

  18. #9
    serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Sep 2007
    Mesajlar
    1.242
    Post Thanks / Like
    Teşekkür
    898
    Thanked 5.591 Times in 868 Posts
    Tecrübe Puanı
    2468
    En son çıkan sürümler için son mesaja gidiniz !

    .
    .

    DVBViewer v6.1.3 Demo




    Change Log DVBViewer Pro 6.1.3 ( 13 Ocak 2019 )


    Recording

    Change/Fix: Recording Timers: The internal timer handling has been reworked and unified, including synchronization with the timer list of an associated Media Server. Several issues have been fixed.
    Added: EPG Window: New “Record Series” command in the context menu and as button. It is only available if DVBViewer is configured as Media Server client (version 2.1.3 or later required), with Options → DVBViewer Media Server → Send timers to the server switched on. The command lets the Media Server create timers for all programs of the same channel with the same title (without appended season and episode numbers) that are currently present in the EPG. Additionally the Media Server creates a search preset that enables automatic timer creation for further episodes. Program repetitions yield deactivated timers that are not executed. For this purpose the Media Server compares the programs with already existing recordings and timers. Please note that this function may create scores of timers at once. For programs that are always broadcasted at the same time on the same day(s), recurring timers with daily/weekly repetition are much more efficient.
    Added: Media Server Client: “Parameters for series recording” tweak (→ see Tweaker.exe). It allows to modify the /api/searchadd.html URL that DVBViewer sends to the Media Server to let it execute the "Record Series" function offered in the EPG window (see above). Further information about this topic will be provided on demand in the DVBViewer Forum.
    Change: Recording Timers: Stopping an ongoing recording manually before its end time, now uniquely results in the following handling of the corresponding timer:
    Manual instant recording: As before the associated timer (by default with a duration of 23:59 hours) is deleted.
    One-time recording: The timer is deactivated, not deleted or kept in an invisible canceled state anymore. Re-activating it restarts recording in another file. The timer is deleted after it has reached its end time.
    Recurring recording (on additional days of the week, weekly repetition): The timer is immediately switched to the next execution date, not kept in an invisible “canceled” state until its end time, that caused an unwanted recording restart after closing and relaunching DVBViewer.
    A forced early recording stop by closing DVBViewer or shutting the PC down keeps the timer in a waiting state, causing the recording to be restarted as soon as DVBViewer is relaunched or wakes up, provided the end time has not been reached yet.
    Please note that deactivating a timer manually always stops a corresponding ongoing recording (as before).
    Fix: Recording Timers: Recording timers for TS Stream channels were wrongly marked as “not executable” in the timer list, if there was no TS Stream device in the hardware list. The functions that checks if timers are executable did not consider that TS Stream devices are auto-created on demand. However, only the UI was affected. The timer was executed anyway.
    Change: Recording: The TV/Radio → Recording Statistics → Recording Status context menu → “Split” menu item now requires the new tweak “Allow manual split of recordings” to become visible (see Tweaker.exe). It also lets this menu item appear in the Main Window → “Record Current Channel” submenu for ongoing manual (instant) recordings. The “Split” function lets the recorder continue the recording in a new file with a number 00x appended to the filename. The split is lossless, so that the parts can be concatenated gaplessly (e.g. by using the TSPlayer). DVBViewer is able to play them as if they were one file. However, the Media Server only considers the first part.
    Added: Recording: TV/Radio → Recording Statistics → Recording Status context menu → “Delete and Restart” menu item. It stops and deletes an ongoing recording and immediately restarts it. Previously this function was only available in the “Record Current Channel” submenu for ongoing manual (instant) recordings. Please note: DVBViewer Media Server 2.1.3 or later is required for this function, if DVBViewer delegates recordings to it.
    Fix: Recording: Picture in Picture context menu → Record Current Channel → Stop after current/next program wrongly referred to the program played in the main window, not the one in the PiP window.
    Fix: Timer Recordings Window: The timer list did not keep its scroll state when it was updated.



    Playback

    Fix: TV/Radio Playback: Live stream playback (particularly via UPnP, HbbTV or the Open URL dialog) could fail if Options → TV/Radio → Fast Channel Switching was switched off.
    Fix: TV/Radio Playback: Missing video format detection in case of switching channels with HEVC video and Lentoid decoder usage. A changed resolution caused a wrong picture size.
    Added: TV/Radio Playback: Method for performing adjustments to the video/audio format later if a necessary format detection on playback start does not succeed within a 3 seconds timeout. This enables for example HEVC playback with the Lentoid decoder or ADTS AAC playback with the Microsoft audio decoder in certain cases where it previously failed.
    Added: Subtitles: Usage of the XYSubFilter (if installed) in combination with the LAV source filter / splitter and MadVR for displaying subtitles e.g. on MKV or MP4 playback. DVBViewer only loads the filter if no other subtitle filter has been added before by a filtergraph preset (see Options -> DirectX -> Presets). Auto-loading of the filter can be switched off with the tweak “Load XYSubFilter for subtitles” (see Tweaker.exe).
    Added: Subtitles: Support for ATSC closed captions (CEA 608) embedded in H.264 video, including US internet streams. Please note that DVBViewer only searches for captions in live H.264 video if the reception type is ATSC or TS Stream, the latter requiring Options → Subtitles → Always check for ATSC captions to be switched on.



    Program appearance and behavior

    Added/Fix: General: Color management that enhances the DVBViewer appearance in case of Windows designs with a dark background. Several DVBViewer defined colors that don't correspond to system colors are now adjusted to the Windows design. The color definitions for bright and dark designs can be tweaked in the file setup.xml. More information about it will be published on demand.
    Fix: Main Window: Under Windows 10 a framed main window snapped to the screen edge did not keep this position after a DVBViewer restart. If View → Show Frame was switched off, but a temporary frame for resizing was visible, switching to another display mode like full screen and back changed the “Show Frame” setting to on. Additionally a frameless window, that was snapped to the screen edge, moved away from it after resizing.
    Added: General: Additional windows (besides the main window) snap to the screen edge: EPG, Timer Recordings, Recording Statistics, Teletext, Channel List etc.
    Change: OSD: Channel switching by number input now uses the Mini EPG for channel preview, not the display at the main window top anymore. Additionally DVBViewer immediately switches over to the channel and does not wait for another digit if the previous input already specifies the channel unambiguously, e.g. favorite number 4 if there are only 35 favorites. In case of 1-based channel numbering the zero key now switches back to the previous channel (formerly without effect).
    Change: EPG Window: New timeline design that indicates the program genres by colors (see here). The tweak “Simple timeline view in the EPG window” (see Tweaker.exe) allows to revert to the simpler timeline view of version 6.1.2 and earlier. The colors and properties of both timeline views can be tweaked in the file setup.xml. More information about it will be published on demand.
    Change: EPG Window: Selecting an EPG item now sets the date/time input area to the item's start time, so that it remains selected on tab changes.
    Fix: EPG Window: Under certain circumstances programs were not marked as “already covered by a timer” if the lead and follow-up time were 0 (see here). The native (not imported) DVB EPG of channels belonging to the TS Stream reception type was not displayed on the TV Guide tab. Channel auto-selection after a channel change did not work properly on the “EPG at...” and “Timeline” tab in case of TS Stream channels with imported EPG.



    Network & Hardware

    Added: Channel Editor: Channel list import plug-in (ImportConf.dll) for the channel.conf files of the Linux VDR, particularly those offered by Vodafone/Kabel Deutschland for cable reception in different regions. Simply drag & drop the downloaded file into the Channel Editor. Additionally future Transedit uploads will be able to create transponder lists out of conf files.
    Change: Media Server Client: More reliable communication with an associated Media Server. DVBViewer now stores the network adapter IP over which the server responded to the search request during the detection process. Henceforth DVBViewer uses this adapter for listening for incoming Media Server messages. Additionally the new tweak “Adapter IP for Media Server messages” can be used to specify the network adapter manually (see Tweaker.exe).
    Change: TS Stream / Channel Editor: HTTP header instructions for Kodi appended to URLs are now automatically translated to the corresponding DVBViewer commands on M3U playlist import (previously only on manual URL input, see here).
    Fix: TS Stream: Channel auto-update issues if a TV server (e.g. Dreambox) delivered the originally broadcasted PAT (Program Allocation Table), that enumerates all services of a transponder. In certain cases DVBViewer was not able to determine in a timely manner which service and which video/audio/subtitle streams were actually contained in the received transport stream (see here).
    Added: IPTV: Batch file DVBViewer_IPTV_Firewall_Rules.bat for setting up firewall rules that allow to receive (multicast) UDP IPTV originating from outside the home network, e.g. T-Entertain/Magenta TV. Please note: The file must be executed with administrator rights (right-click it → Run as administrator). Only use this file if DVBViewer is running behind a router. The file DVBViewer_Firewall_Rules.bat can be used to return to the normal (default) firewall setup.
    Fix: Hardware Options: The Unicable dialog did not display the Unicable 2 slot number range correctly. After being reopened it showed a wrong Unicable 2 slot number (see here). Internally the values were stored correctly.
    Added: Hardware: Handling of TBS 5520 SE / TBS 5580 / 5590 USB boxes as DVB-S2/T2/C hybrid tuners. Switching between the tuner types, which previously had to be performed with a TBS tool, is now done inside DVBViewer according to the type of the selected channel. In case of an already existing DVBViewer installation Options → Hardware → Scan Devices is required to let the additional tuner entries appear.
    Fix: Hardware: Wrong detection of some Hauppauge devices as hybrid tuners, though they were dual tuners (see here).




    En son çıkan sürümler için son mesaja gidiniz !

    **Hidden Content: Reply or Thanks to see the content**


    En son çıkan sürümler için son mesaja gidiniz !
    Konu serkanguzel tarafından (23-07-2019 Saat 09:29 ) değiştirilmiştir.
    Doğru bilginin adresi...

    Geneli ingilendiren sorulara PM'den yanıt veremiyorum. Katılımcıların yararlanabilmesi için,
    sorularımızı açık alandan sormaya özen göstermeliyiz. Anlayışınız için şimdiden teşekkürler.

  19. The Following User Says Thank You to serkanguzel For This Useful Post:

    csakilee (30-01-2019)

  20. #10
    serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Sep 2007
    Mesajlar
    1.242
    Post Thanks / Like
    Teşekkür
    898
    Thanked 5.591 Times in 868 Posts
    Tecrübe Puanı
    2468
    En son çıkan sürümler için son mesaja gidiniz !

    .
    .

    DVBViewer v6.1.4 Demo




    Change Log DVBViewer v6.1.4 ( 28 Ocak 2019 )


    Fix : EPG Window : Text in the simple timeline view was not centered vertically.

    Fix : Recording Timers : Potential access violations or read of undefined (random) memory contents, if the timer list contained timers for the TS Stream reception type.

    Fix : Recording Timers : New timers (particularly those created on the “EPG per Channel” tab of the EPG Window) were not automatically selected and scrolled into view in the Timer Recordings window, if open.

    Fix : Hardware : If the handling of TBS 5520 SE / TBS 5580 / 5590 USB boxes as DVB-S2/T2/C hybrid tuners failed, the whole device initialization failed (see here). Now it falls back to normal mode where the demodulator type has to be selected by using an external TBS switching tool. Failure logging has been added.





    En son çıkan sürümler için son mesaja gidiniz !

    **Hidden Content: Reply or Thanks to see the content**


    En son çıkan sürümler için son mesaja gidiniz !
    Konu serkanguzel tarafından (23-07-2019 Saat 09:30 ) değiştirilmiştir.
    Doğru bilginin adresi...

    Geneli ingilendiren sorulara PM'den yanıt veremiyorum. Katılımcıların yararlanabilmesi için,
    sorularımızı açık alandan sormaya özen göstermeliyiz. Anlayışınız için şimdiden teşekkürler.

  21. The Following User Says Thank You to serkanguzel For This Useful Post:

    csakilee (30-01-2019)

Konu Kapatılmıştır
Sayfa 1 Toplam 2 Sayfadan
1 2 SonuncuSonuncu

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Tags for this Thread

Bookmarks

Yetkileriniz

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
TOPlist TopSat.Org