+ Konu Cevaplama Paneli
Sayfa 1 Toplam 3 Sayfadan
1 2 3 SonuncuSonuncu
1 den 10´e kadar. Toplam 24 Sayfa bulundu

Konu: dreambox + gbox resimli anlatım

  1. #1
    Vodk@Orange taninmis sohret sahibi uye Vodk@Orange taninmis sohret sahibi uye Vodk@Orange taninmis sohret sahibi uye Vodk@Orange taninmis sohret sahibi uye Vodk@Orange taninmis sohret sahibi uye Vodk@Orange taninmis sohret sahibi uye Vodk@Orange taninmis sohret sahibi uye Vodk@Orange taninmis sohret sahibi uye Vodk@Orange taninmis sohret sahibi uye Vodk@Orange taninmis sohret sahibi uye Vodk@Orange taninmis sohret sahibi uye Vodk@Orange - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Feb 2006
    Nerden
    Alice Harikalar Diyarından
    Mesajlar
    1.261
    Post Thanks / Like
    Teşekkür
    89
    Thanked 1.888 Times in 275 Posts
    Tecrübe Puanı
    1838

    dreambox + gbox resimli anlatım

    Ilk önce [Only registered and activated users can see links. ] adresinden account alacaksiniz bedava

    [Only registered and activated users can see links. ]










    asagidaki resimde görünüdügü gibi iki kutucuklari isaretleyin
    ve k****mak istediginiz isimi ve e-mailinizi yazin
    e-mailinize activation gelecek sonra
    herseyi yazdiktan sonra asagian create account tiklayin





    sonra böyle bir resim gelecek account yapildi diye



    simdi E-Mailinize gelen bir link var ona tiklayip activ yapin



    simdi account confirmed diye bir uyari geliyor
    orada yukari sagda login yapiyorsunuz




    ve My Servicese giriyoruz




    simdi Add Host Services tikliyoruz





    ordanda Add Dynamic DNS Host



    simdi asagidaki resime dikkatli bakarsaniz
    sagda ückene tiklayinca asagiya dogru ekran aciliyor
    oradan istediginz birisi secin ben dyndns.biz sectim
    sol tarafada isim olarak sismanoglan verdim
    Enable Wildcard: burayi isaretleyin



    yani bu resimdekigibi olacak
    Sorada Add Host tiklayin




    simdi hostname creaded ekrani geliyor



    DNS Islemi buraya kadar

    simdi sirada router de

    burda yapmaniz gerken iki sey var

    1- actiginiz dyndns adresini ve sifresini routere kayit etmek

    2- Port acmak ben 2499 yaptim

    asagidaki örneklerden görebilirsiniz


    simdi birinci islem portforwarding yani portweiterleitung ( port yönlendirme )




    benim routerde UDP acik olmadigi icin oradan news seciyorum ve orayada recieverinizin ip sini vereceksiniz
    ben 192.168.0.151 yaptim



    asagida resime bakarsaniz News olarak geldi
    portlar 119 - 119
    reciever ip si 192.168.0.151
    simdi News olan yeri editliyecegiz
    1 yazan yeri isaretleyip edit Service tikliyoruz



    gelen yere asagidakigibi eliniz ile yazin UDP Service Typ de UDP olacak
    portlari ben 2499 - 2499 yaptim
    siz isterseniz 2500 - 2500 yapabilirsiniz
    size kalmis birsey
    recieverin ip si 192.168.0.151
    bu ayarlari degistirdikten sonra
    kayit edin yani save



    simdi asagidakiki görüntü gelecektir
    port acma isi bitti




    sira DNS i kayit yapmaya geldi
    asagidaki resime bakarsaniz
    DNS de aldigimiz accountu buraya kayit ediyor ve
    eger wildcard isaretliyoruz
    sonra save yaptinizmi islem bitti



    simdi iki sey daha var onu yapmak zorunda deyilsiniz
    Recieverinizin FTP ve TELNET acma
    FTP neye gerekli :
    eger baska bir yerdesiniz ve recieverinize bir ayar yada ne bileyim
    yeni birini kayit etmek icin lagzim
    Telnet ne icin gerekebilir :
    diyelimki arkadasiniza gittiniz oradan telnet üzeri kendi evinizdeki
    recieveri reboot yapabilirsiniz bu tek bir örnek
    eger bunlari yapmakta kararli iseniz
    13. resimdekigibi news olarak seciyorum ben
    sonrada
    editliyorum FTP VE TELNET olarak
    sadece burada portlar degisik olacak
    FTP 20-21 veya 21-21
    Service Type TCP
    TELNET 23-23
    Service Type TCP





    herseyi dogru yaptinizsa asagidakigi bir görüntü ortaya cikiyor



    [/CENTER]


    Dreamboxda gbox icin lazim olan dosyalar
    Bu örnek Gemini image icindir
    Flashfxp ile ile Dreamboxunuza baglandik tan sonra
    gbox emu >> var/bin klasörüne gelmesi lazim ve chmod 755 yapilacak

    gbox.cfg + softcam.cfg + cwshare.cfg >> bunlari ücü de oldugu gibi var/keys klasörüne atilacak ,bunlarda chmod 755 yapilmasi gerek deyil

    gbox_cam.sh >> bu ise var/script icine atilacak ve chmod 755 yapilacak


    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    Bu hazir dosyayi tmp dosyasina atin ve kumandadan manuel instal edin kendisi gereken yerlere yükleyecektir,
    Sizlere sadece cwshare.cfg dosyasini kendi bilgilerinizi yazmak kaliyor


    cwshare.cfg deki ayarlar

    Burasi aciklama ,asada original halini görebilirsiniz

    M: { buraya kendi dyn adresiniz gelmesi lazim { buraya kendi passinizi yazmalisiniz }}
    # Internet Friends port range password cod
    D: { buraya ise paylasim yaptiginiz arkadasinizin ipsi yazilmasi lazim { burasi paylasim yaptiginiz port { burasi arkadasinizin passi { 5 5 }}}} 5 5 olan yer ise su sekil >
    ilk 5 olan kendi kartinizi 5 kere devam verme yetikisi veriyorsunuz
    ikinci 5 olan ise paylasimdan aldiginiz kartlari devam verme yetkisi vermis oluyorsunuz

    I: { 05 } # burasi 5 uzaklikdaki paylasimdan yayin alma ayari
    N: { 00 01 03 00 3000 5000 }
    X: { 10 } # burasi ayni kart dan 10 tanesine müsade et

    G: { 0500xx00 AAAA } # burasi ise paylasimda öncülük olarak kimin kartindan alsin ayari ben ornek ( 0500xx00)id lerini aldim misal olarak AAAA yerine ise kart sahibinin Box id sini yazman lazim
    G: { 0500xx00 AAAA }
    G: { 0500xx00 AAAA }

    N: { 01 01 03 00 4000 6000 }
    #

    ,


    Burasi ise olmasi gereken ayar

    M: { benim.dyndns.org { 12345678 }}
    # Internet Friends port range password cod
    D: { arkadasim.dyndns.org { 2499 2499 { 12345679 { 5 5 }}}}

    I: { 05 }
    N: { 00 01 03 00 3000 5000 }
    X: { 10 }

    G: { 0500xx00AAAA }
    G: { 0500xx00 AAAA }
    G: { 0500xx00 AAAA }









    Bu asagidaki config sizinkisi olsun






    #
    M: { ahmet.dyndns.biz { DEEB0001 }}
    #
    D: { mehmet.dyndns.biz { 2499 2499 { ABCD0123 { 6 6 }}}}




    Bu config de arkadasinizinkisi olsun



    #
    M: { mehmet.dyndns.biz { ABCD0123 }}
    #
    D: { ahmet.dyndns.biz { 2499 2499 { DEEB0001 { 6 6 }}}}


    Neticede bu örneklere göre kenidiniz yapabilirsiniz,sizin icin en önemlisi
    M olan yere kendi dynadresinizi ve passi nizi yazmanizdir

    D olan yere ise Paylasim yaptiginiz kisinin dyn adresi paylasimda kullandiginiz port ve arkadasinizin passi





    Newcs2gbox yapmak icin gereken dosyalar

    Bin / cs2gbox/newcs/gbox chmod 755 olacak

    Keys /cs2gbox.cfg/cwshare.cfg/gbox_cfg/softcam.cfg


    var/tuxbox/config/newcamd.conf/newcs.xml

    gemingin icin
    script/ g.box dosyasi chmod 755 olacak

    hydra icin
    smartcam.config


    Var/keys

    cs2gbox.cfg

    # Options
    # print infos/errors
    # | print Hello
    # | | print ecm/cw
    # | | | print CW's
    # | | | | try to reconnect imidiatly after lost connection
    # | | | | | print on screen
    # | | | | | | print into debug.txt
    # | | | | | | | on callback reconnect after 30 seconds
    # | | | | | | | | on login failed, retry afer 5 seconds (only 1 time)
    # | | | | | | | | | try to connect to unconnected server every hour (3600 seconds)
    # | | | | | | | | | | minimum time distance (in seconds) between login's (force login delay)
    # | | | | | | | | | | | keep internet alive every 360 seconds
    # | | | | | | | | | | | | ping cardservers (keep alive) every 360 after last activity
    # | | | | | | | | | | | | | connect timeout
    P: { 01 00 01 00 01 01 00 30 05 3600 05 360 360 1 }


    # ignore
    # caid provider = for all systems except via
    # ca provider = for viaccess
    #

    # My dbox2 password
    M: { 192.168.1.10 { 33345679 }}
    # passcs2gbox
    # Internet Friends port range password cod
    D: { 192.168.1.10 { 6668 6667 { FFFF0001 { 4 4 }}}} dns.deki özel sifren geliyor
    #passligneMcwshare.cfg de_Dreambox ou Serveur
    # name dns/ip port user pass callback configkey
    #C: { cardserv 192.168.1.10 10001 local local 12000 01 02 03 04 05 06 07 08 09 10 11 12 13 14 } newcamda mg_camda ve evocamda verilenleri bu sekil ekliyorsun

    C: { cardserv 192.168.1.10 24011 local local 12000 01 02 03 04 05 06 07 08 09 10 11 12 13 14 }
    # Slot1
    C: { cardserv 192.168.1.10 24010 local local 12000 01 02 03 04 05 06 07 08 09 10 11 12 13 14 }
    # Slot2


    Var/keys
    Cwshare.cfg

    #
    I: { 06 }
    X: { 0A }
    N: { 01 01 03 00 4000 6000 }
    # password
    M: { 192.168.1.10 { FFFF0001 }} dns özel sifre
    # Internet Friends port range password cod
    D: { 192.168.1.10 { 6667 6668 { 33345679 { A4 A4 }}}}



    Kod:
    var/tuxbox/config/ icine editlenecek
    
    newcamd.conf
    
    # /var/tuxbox/config/newcamd.conf
    #
    # this is the configfile for MGCamd with NewCS!!!!
    #
    #
    # What Demux API is used? (1 = very old, 2 = rel (Dreambox), 3 = head (VDR))
    DEMUX_API = 2
    # on PPC version: What Box is used? Valid options are DBOX2, DM7000 and DM5600
    # on I386 version this parameter is ignored
    BOX_TYPE = DM7020
    # Which device for writing control words should be used?
    # Valid options are CA, SDEV or GTX
    # (SDEV and GTX = /proc/bus/gtx, CA = /dev/caX or /dev/dvb/card0/caX)
    CONTROL_WORD_DEVICE = CA
    # What CA0 API is used?
    # 3 for recent DVB-S driver or recent Dreambox drivers (dream.o from 1.07.3)
    # also for ca1 use on dbox2
    # 2 for older Dreambox driver (ca.o or dream.o up to 1.07.2)
    # no effect on PPC version if CONTROL_WORD_DEVICE = GTX or SDEV
    CA_API = 3
    # output control words to /proc/bus/gtx in 16 byte or 4096 byte packets
    # no effect on I386 version or on PPC version, if BOX_TYPE = DREAMBOX
    GTX_OUTPUT_MODE = 16
    # This is important for channels which frequently change between free and
    # encrypted broadcasts. The change will be reflected in the PMT. If you
    # don't want your picture to stop when the channel goes from free access
    # mode to encrypted mode, either your zapper (zapit/Enigma) or newcamd
    # itself has to keep track of PMT changes. Recent Enigma versions do this,
    # so you can set PMT_UPDATE_WATCH to no. Recent Zapit versions also have
    # this option, but it is not compiled by default. So when using Zapit
    # without PMT updates, you need to enable newcamd to monitor the PMT
    # (PMT_UPDATE_WATCH = yes). Having both zapper and newcamd monitor
    # the PMT at the same time, can lead to all kind of instabilities and
    # should therefore by avoided, even if it seems to work at first.
    PMT_UPDATE_WATCH = yes
    # Use emulator?
    EMU = yes
    # if both control word server and emulator keys are available for the
    # channel, which method should be tried first?
    PREFER_EMU = yes
    # deactivates the dbox2 Betacrypt CAM
    # this has to be set to yes on Dreambox
    DISABLE_CAM = yes
    # use dbox2 Betacrypt CAM for caids 06, 17 or both (00)?
    CAM_CASYS = 17
    # Autoupdate for Emu and Control Word Servers
    # AU is always yes if there are Betacrypt UDS control word server
    # connected to newcamd
    AU = yes
    #
    # newcamd debug options
    #
    # dumps all ca systems used by a channel on the console
    SHOW_ALL_CA_SYSTEMS = no
    # On Screen Display, neutrino, enigma or none
    OSD = none
    # Recent Enigma versions come with a new option "Use http authentication"
    # in the Expert Setup menu. If this option is enabled, the Enigma web server
    # requires all clients to authorize themselves with username (root) and
    # password (usually dbox2 or dreambox). The following option tells newcamd
    # about the authentication username and password to use for the web server
    # in order to be able to display its on screen information.
    OSD_WEB_LOGIN = root:dreambox
    # print debug messages about ECM handling
    DEBUG_ECM = yes
    # print debug messages about EMM handling
    DEBUG_EMM = no
    # print debug messages about Control Word Server (CWS)
    DEBUG_CWS = yes
    # print debug messages about dbox2 CAM (cam-alpha.bin)
    DEBUG_CAM = yes
    # print command message to/from dbox2 CAM as hex strings
    DEBUG_CAM_HEX = no
    # print all plain control words used
    SHOW_CW = no
    # hex dump of entire PAT
    SHOW_PAT = no
    # hex dump of entire PMT
    SHOW_PMT = no
    # hex dump of entire ECM
    SHOW_ECM = no
    # hex dump of entire CAT
    SHOW_CAT = no
    # hex dump of entire EMM (AU)
    SHOW_EMM = no
    # show network ECM messages being sent and received from/to the cardservers
    SHOW_CWS_ECM = no
    # show network EMM messages being sent and received from/to the cardservers
    SHOW_CWS_EMM = no
    # hex dump of EMMs with wrong signature
    EMM_REPORT_WRONG_SIG = no
    # delay between channel zap and appearance of the OSD
    OSD_WAIT_TIME = 2000
    #
    # newcamd optional settings
    #
    # Delay between reception of new control word and writing them into
    # the CSA registers
    # this is a default, can be changed for each individual key in keylist
    DEFAULT_CW_DELAY = 500
    # reload config on every channel zap
    RELOAD_CONFIG_ON_ZAP = yes
    # reload keylist on every channel zap
    RELOAD_KEYLIST_ON_ZAP = no
    # write osd ca info to file
    # CA_INFO_FILE = /tmp/cainfo.txt
    #
    # newcamd mandatory settings for control word servers (cws)
    #
    # Cardserver list
    # 
    # <hostname> <port> <username> <password> <14 byte triple-des key in hex> <lan/wan> <cardserver name>
    #
    # wan connections will be dropped and rebuild if newcamd is told so by camdcmd
    # (see admin options)
    #
    # hostname = uds to use betad, port is the serial port in that case
    #
    #CWS = uds 1 premiere premiere
    CWS = 127.0.0.1 24010 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcs
    CWS = 127.0.0.1 24011 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcs
    CWS = 127.0.0.1 24012 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcs
    #
    # newcamd optional settings for using control word servers (cws)
    #
    # Timeout for cardserver login in 100ms
    CWS_CONNECT_TIMEOUT = 20
    # Port to listen for incoming cardserver connections (reverse login)
    # and/or admin connections
    CWS_INCOMING_PORT = 12000
    # Port to get a list of all connected cardservers, just telnet to it
    CWS_DEBUG_PORT = 12001
    #
    # newcamd admin control options
    # (incoming port is the same as CWS_INCOMING_PORT)
    #
    # <password> <14 byte des key>
    #
    ADMIN_PASSWORD = secret 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    
    P.S. port 24010 et 24011 cs2gbox
    
    
    var/tuxbox/config/ icine editlenecek
    
    Newcs.xml
    
    <?xml version="1.0"?>
    <!--
    
    For setup-issues, look in readme.txt!
    If there are other troubles, try different forums or irc channels around :o)
    
    -->
    
    Var/
    
    <newCSconfig>
    
    <readers name="Card Readers">
    <device>
    <name>lower</name>
    <type>Sci</type>
    <node>/dev/sci0</node>
    <export>yes</export>
    <enabled>yes</enabled>
    <blocksa>No</blocksa>
    <blockua>No</blockua>
    <blockga>No</blockga>
    <boxkey>0000000000</boxkey>
    <PTShandshake>no</PTShandshake> 
    <crypto-special>no</crypto-special>
    <carddetect>yes</carddetect>
    <newcamd_port>24010</newcamd_port>
    <priority>round</priority> 
    <sid>
    <allow>
    <!-- valid value for id are: 
    4 numbers, if the service id is 3 numbers, add a 0 infront of it. -->
    <id></id>
    </allow>
    <deny>
    <!-- valid value for id are: 
    4 numbers, if the service id is 3 numbers, add a 0 infront of it. -->
    <id></id> 
    </deny>
    </sid>
    </device>
    
    <device>
    <name>upper</name>
    <type>Sci</type>
    <node>/dev/sci1</node>
    <export>yes</export>
    <enabled>yes</enabled>
    <blocksa>No</blocksa>
    <blockua>No</blockua>
    <blockga>No</blockga>
    <boxkey>0000000000</boxkey>
    <PTShandshake>no</PTShandshake> 
    <crypto-special>no</crypto-special>
    <carddetect>yes</carddetect>
    <newcamd_port>24011</newcamd_port>
    <priority>round</priority> <!-- hard is default -->
    <sid>
    <allow>
    <!-- valid value for id are:
    Gültige Werte für caid: 
    4-stelliger DVB-CAID Code
    0500 - Viaccess 1/2/TPS-Crypt
    0B00 - Conax
    0100 - Seca 1/2 
    0919 - Sky Italia NDS
    0911 - Viasat NDS
    0960 - Sky UK
    0961 - Sky UK
    1702 - Premiere Sat Aladdin
    1722 - Premiere Kabel Aladdin
    1762 - ORF/ATV+ Betacrypt
    1800 - Nagravision 1
    1801 - Nagravision 2
    0D02 - UPC Cryptoworks
    0D05 - ORF/ATV+/easy.tv Cryptoworks 
    4A70 - Dreamcrypt
    0606 - Irdeto 1
    0602, 0604, 0606, 0608, 0622, 0626 - Irdeto 2
    4AD4 - Omnicrypt
    4A60, 4A61, 4A63 - Skycrypt 4AD0, 4AD1 - X-Crypt --> 
    4 numbers, if the service id is 3 numbers, add a 0 infront of it. -->
    <id></id>
    </allow>
    <deny>
    <!-- valid value for id are: 
    4 numbers, if the service id is 3 numbers, add a 0 infront of it. -->
    <id></id> 
    </deny>
    </sid>
    </device>
    
    <device>
    <name>phoenix</name>
    <type>phoenix</type>
    <node>/dev/tts/0</node>
    <mhz>357</mhz>
    <export>yes</export>
    <enabled>yes</enabled>
    <blocksa>No</blocksa>
    <blockua>No</blockua>
    <blockga>No</blockga>
    <boxkey>0000000000</boxkey>
    <PTShandshake>no</PTShandshake> 
    <crypto-special>no</crypto-special>
    <carddetect>yes</carddetect>
    <newcamd_port>24012</newcamd_port>
    <priority>round</priority> 
    <sid>
    <allow>
    <!-- valid value for id are: 
    4 numbers, if the service id is 3 numbers, add a 0 infront of it. -->
    <id></id>
    </allow>
    <deny>
    <!-- valid value for id are: 
    4 numbers, if the service id is 3 numbers, add a 0 infront of it. -->
    <id></id> 
    </deny>
    </sid>
    </device>
    </readers> 
    
    <radegastserver>
    <!-- valid value for enable are: 
    0,1 - Enable or Disable radegast server. --> 
    <enabled>no</enabled>
    
    <!-- valid value for port are: 
    0,65535 - Which port to listen for incomming connections. -->
    <port>10001</port>
    
    <!-- valid value for allow are: 
    ALL - Not active yet. --> 
    <allow>
    <hostname>127.0.0.1</hostname>
    </allow>
    </radegastserver>
    <cache>
    <emm>10</emm>
    <ecm>10</ecm>
    </cache> 
    <debug>
    <level>normal</level> 
    <type>init</type>
    <output>all</output>
    <logfile></logfile>
    <console_options></console_options>
    <file_options></file_options>
    <udp_host>192.168.1.10</udp_host>
    <udp_port>1000</udp_port>
    <udp_options></udp_options>
    <tcp_port>3001</tcp_port>
    <tcp_options></tcp_options>
    </debug>
    <newcamdserver>
    <enabled>yes</enabled>
    <name>newcs</name>
    <deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
    <userfile>/tmp/users.txt</userfile>
    <user>
    <name>local</name>
    <password>local</password>
    <au>on</au>
    <allow>lower</allow> <!--Use this just when you want give free just some readers to your Users -->
    <allow>upper</allow>
    <allow>phoenix</allow> <!--Use this just when you want give free just some readers to your Users -->
    </user>
    <user>
    <name>User1</name>
    <password>Pass1</password>
    <au>on</au>
    </user>
    <user>
    <name>User2</name>
    <password>Pass2</password>
    <hostname>192.168.1.10</hostname> <!--Is just for Reverse Login needed -->
    <port>14445</port> <!--Is just for Reverse Login needed -->
    </user>
    
    
    </newcamdserver>
    
    </newCSconfig>
    alıntıdır

  2. The Following 10 Users Say Thank You to Vodk@Orange For This Useful Post:

    armanygio (25-03-2007), Aykocan (26-10-2007), baykaya (12-03-2008), carlos21 (17-02-2009), eldron (28-09-2007), gafo (12-04-2007), geroye (19-05-2007), ihsaniye (19-01-2011), mercanx (15-05-2007), seheryeli21 (17-01-2008)

  3. #2
    ONBASI
    cuba1 is on a distinguished road cuba1 - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Oct 2006
    Mesajlar
    13
    Post Thanks / Like
    Teşekkür
    0
    Thanked 2 Times in 1 Post
    Tecrübe Puanı
    33
    Güzel anlatim arkadas ama gbox_cfg ayarlari?

    Sonra oomatikmen dream yüklemeye yapilinca chmod ayarlarida mi yapiliyor?

  4. The Following 2 Users Say Thank You to cuba1 For This Useful Post:

    Aykocan (26-10-2007), ismail* (22-12-2007)

  5. #3
    ER ahmet1972 is on a distinguished road ahmet1972 - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Feb 2007
    Yaş
    51
    Mesajlar
    1
    Post Thanks / Like
    Teşekkür
    0
    Thanked 1 Time in 1 Post
    Tecrübe Puanı
    0
    dosyaları ındıremıyorum buraya atabılırmısın

  6. The Following User Says Thank You to ahmet1972 For This Useful Post:

    Aykocan (26-10-2007)

  7. #4
    Vodk@Orange taninmis sohret sahibi uye Vodk@Orange taninmis sohret sahibi uye Vodk@Orange taninmis sohret sahibi uye Vodk@Orange taninmis sohret sahibi uye Vodk@Orange taninmis sohret sahibi uye Vodk@Orange taninmis sohret sahibi uye Vodk@Orange taninmis sohret sahibi uye Vodk@Orange taninmis sohret sahibi uye Vodk@Orange taninmis sohret sahibi uye Vodk@Orange taninmis sohret sahibi uye Vodk@Orange taninmis sohret sahibi uye Vodk@Orange - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Feb 2006
    Nerden
    Alice Harikalar Diyarından
    Mesajlar
    1.261
    Post Thanks / Like
    Teşekkür
    89
    Thanked 1.888 Times in 275 Posts
    Tecrübe Puanı
    1838
    Alıntı ahmet1972´isimli üyeden Alıntı Mesajı göster
    dosyaları ındıremıyorum buraya atabılırmısın
    dosya linklerinde sorun yok kontrol ettim

  8. The Following 2 Users Say Thank You to Vodk@Orange For This Useful Post:

    Aykocan (26-10-2007), utuzgu1973 (05-03-2008)

  9. #5
    ER Nisan_yagmuru is on a distinguished road Nisan_yagmuru - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Dec 2006
    Yaş
    48
    Mesajlar
    1
    Post Thanks / Like
    Teşekkür
    5
    Thanked 1 Time in 1 Post
    Tecrübe Puanı
    0
    indirilen dosyalar gbox klasörünemi atılacak

    birde router dediğin şey ne bi çeşit proğrammı yoksa sitemi burayı biraz açıklarmısın
    Konu Nisan_yagmuru tarafından (10-07-2007 Saat 15:31 ) değiştirilmiştir.

  10. The Following User Says Thank You to Nisan_yagmuru For This Useful Post:

    Aykocan (26-10-2007)

  11. #6
    Vodk@Orange taninmis sohret sahibi uye Vodk@Orange taninmis sohret sahibi uye Vodk@Orange taninmis sohret sahibi uye Vodk@Orange taninmis sohret sahibi uye Vodk@Orange taninmis sohret sahibi uye Vodk@Orange taninmis sohret sahibi uye Vodk@Orange taninmis sohret sahibi uye Vodk@Orange taninmis sohret sahibi uye Vodk@Orange taninmis sohret sahibi uye Vodk@Orange taninmis sohret sahibi uye Vodk@Orange taninmis sohret sahibi uye Vodk@Orange - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Feb 2006
    Nerden
    Alice Harikalar Diyarından
    Mesajlar
    1.261
    Post Thanks / Like
    Teşekkür
    89
    Thanked 1.888 Times in 275 Posts
    Tecrübe Puanı
    1838
    Alıntı Nisan_yagmuru´isimli üyeden Alıntı Mesajı göster
    indirilen dosyalar gbox klasörünemi atılacak

    birde router dediğin şey ne bi çeşit proğrammı yoksa sitemi burayı biraz açıklarmısın
    en usteki download linki ip update etmek icin kullanilan bir program gbox klasorune atmana gerek yok.bahsettigim sey router li modem

  12. The Following User Says Thank You to Vodk@Orange For This Useful Post:

    Aykocan (26-10-2007)

  13. #7
    ER marangoz is on a distinguished road marangoz - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Jun 2006
    Mesajlar
    3
    Post Thanks / Like
    Teşekkür
    2
    Thanked 1 Time in 1 Post
    Tecrübe Puanı
    0
    çok faydası oldu,emegin için gerçekten teşekkür ederim.

  14. The Following User Says Thank You to marangoz For This Useful Post:

    Aykocan (26-10-2007)

  15. #8
    ER NFY is on a distinguished road NFY - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Sep 2006
    Mesajlar
    2
    Post Thanks / Like
    Teşekkür
    2
    Thanked 1 Time in 1 Post
    Tecrübe Puanı
    0
    Çok teşekkürler bu kadar ayrıntılı açıklama başka hiç biryerde yok..

  16. The Following User Says Thank You to NFY For This Useful Post:

    Aykocan (26-10-2007)

  17. #9
    ER 1907 is on a distinguished road 1907 - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Oct 2007
    Mesajlar
    4
    Post Thanks / Like
    Teşekkür
    16
    Thanked 1 Time in 1 Post
    Tecrübe Puanı
    0

    gbox

    bu konularda biraz acemiyimde kusura bakmayın birşey sorucağım elimdeki orjinal kartı dreambox ta cc cam ile seyredebiliyorum fakat gbox u çalıştırınca kanallar açılmıyor ben bu kartı gboxta çalışmazken nasıl paylaştırıcağım gbox ta bilgilendirirseniz sevinirim

  18. The Following User Says Thank You to 1907 For This Useful Post:

    oz@ (28-10-2008)

  19. #10
    Banned asice is on a distinguished road asice - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Nov 2007
    Yaş
    49
    Mesajlar
    17
    Post Thanks / Like
    Teşekkür
    8
    Thanked 4 Times in 4 Posts
    Tecrübe Puanı
    0
    arkadaslar kusura bakmayın mesela bende 3 adet kart var diyelim bunları paylaşıma acmak için pc mi daha iyi olur yoksa dream cihazlarmı daha iyidir pc ile paylaşım yapacaksam pc 7 gün 24saat açık olmak zorundamı bide paylaşım verceğim kişilerin hepsine ayrı ayrı port ve ayrı ayrı host almak zorundamıyız bide kime paylaşım verdiysem ben kendi pcmden görebililirmiyim kaç kişinin online olduğunu kusura bakmayın arkadaşlar yardımlarınızı rica ediyorum acemiyim neolur bağışlayın

  20. The Following User Says Thank You to asice For This Useful Post:

    esber (27-08-2008)

+ Konu Cevaplama Paneli
Sayfa 1 Toplam 3 Sayfadan
1 2 3 SonuncuSonuncu

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Bookmarks

Yetkileriniz

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
TOPlist TopSat.Org