local harici biyerden http://no-ipadresin:15000 yaz enterle web üzerinden şifreli semboller çıkıyorsa portun açıktır host yok diyorsa demekki portunu açamamışsındır
local harici biyerden http://no-ipadresin:15000 yaz enterle web üzerinden şifreli semboller çıkıyorsa portun açıktır host yok diyorsa demekki portunu açamamışsındır
Yerel Platformların (Digiturk, D-Smart, NBA, e2, Discovery v.s.) İllegal izlenmesine yönelik şifre, bilgi v.s. veren arkadaşlar forumdan ömür boyu banlanacaktır. Forum Kurallarını Okuyalım JavaChat - Online Sohbet
Güncel SoftCam.Key Güncel vkeys.db Güncel v_sids.db
eldron (16-10-2007)
su an karsımda dream, kucagımda laptop.. dreambox ip: 192.168.2.2
laptop ip: 192.168.2.5
Ne yapmalıyım. Bu saate nereye gideyim bilmiyorum artık.
chate gel bakalım @doppler
Yerel Platformların (Digiturk, D-Smart, NBA, e2, Discovery v.s.) İllegal izlenmesine yönelik şifre, bilgi v.s. veren arkadaşlar forumdan ömür boyu banlanacaktır. Forum Kurallarını Okuyalım JavaChat - Online Sohbet
Güncel SoftCam.Key Güncel vkeys.db Güncel v_sids.db
http:no-ip adresim:15000 ve http:no-ip adresim:15001 denemelerimde sonuç alamadım...
malum modemde local Ip lere göre 2 port açmış bulunmaktayım. 15000 ve 15001. Bunlar açık mı su an hala test edemedim, hem local hem de local harici.
Not: chat'e gelemiyorum, çünkü mirc'den statusa geliyorum, /server dvbsat.dyndns.biz yazıyorum, şu hata geliyor:
''Unable to resolve server''
saygılarımla...
Not:Şimdiden ''her zaman kahrımızı çeken '' tüm dvbsat ailesine iyi bayramlar diliyorum.
TSİ 13 gibi bayram seyehatına çıkacağım için pazar gününden itibaren denemelere ve sorulara kaldığım yerden devam etmeyi düşünüyorum, tabi ki izninizle...
Konu Doppler tarafından (14-11-2007 Saat 00:00 ) değiştirilmiştir.
/server irc.dvbsat.org sendeki adres fi tarihinden kalma herhalde
Yerel Platformların (Digiturk, D-Smart, NBA, e2, Discovery v.s.) İllegal izlenmesine yönelik şifre, bilgi v.s. veren arkadaşlar forumdan ömür boyu banlanacaktır. Forum Kurallarını Okuyalım JavaChat - Online Sohbet
Güncel SoftCam.Key Güncel vkeys.db Güncel v_sids.db
bayram mesajlarınızı lütfen http://www.dvbsat.org/forum/showthread.php?t=42311 bu linke yazın ki konu karışmasın
saygılar.
Yerel Platformların (Digiturk, D-Smart, NBA, e2, Discovery v.s.) İllegal izlenmesine yönelik şifre, bilgi v.s. veren arkadaşlar forumdan ömür boyu banlanacaktır. Forum Kurallarını Okuyalım JavaChat - Online Sohbet
Güncel SoftCam.Key Güncel vkeys.db Güncel v_sids.db
/server irc.dvbsat.org yadıktan sonra kanal ismi soruyor, bir liste geliyor, neyi işaretlemem gerek bilmiyorum.
Dünde girdim foruma, ama chate gelin dediniz diye aynı problemleri yeniden buradan saymak istemedim.. artık chat'den halledicez başka yolu kalmadı gibi.
saygılar..
Tüm sistemi yazıp sorunu anlamaya çalışalım. Lakin chatte denemelerimiz sonuçsuz kaldı.Bu kadar ayrıntıyı da chate yazmak zor tabi.
Amaç: mgcamd+newcs kullanmak şartıyla, Dreambox için açılmış portun açılıp açılmadığını anlamak.
DM 500 gemini 4.0 sistemi içindeki emular: addonstan indirdiğim mgcamd 1.25 ve C cam 2.04. (Newcs bin yükleyemedim, gerek var mı onuda bilmiyorum)
Modemim: Arties 211 wirelees modem. Dreambox için açtığım port: 15001
inadyn de: no ip'ten aldığım host update ediliyor, çünkü logfile deyince dışarıya çıktığm IP adresi çıkıyor. ('...no-ip.biz' to IP '88.226.---.---' gibi)
Yine inadynde mavi tuş-view'e basılınca:
INADYN: Started 'INADYN version 1.96' - dynamic DNS updater.
I:INADYN: IP address for alias '....no-ip.biz' needs update to '81.213.---.--'
I:INADYN: Alias '....no-ip.biz' to IP '81.213.---.--' updated successful.
I:INADYN: IP address for alias '....no-ip.biz' needs update to '88.254.--.---'
I:INADYN: Alias '....no-ip.biz' to IP '88.254.---.---' updated successful.
I:INADYN: IP address for alias '....no-ip.biz' needs update to '88.226.---.---'
I:INADYN: Alias '....no-ip.biz' to IP '88.226.---.---' updated successful.
INADYN:IP: Error '0xb' resolving host name 'ip1.dynupdate.no-ip.com'
BUNDAN SONRAKİLER GALİBA DIŞARIDAN BAĞLANINCA OLUŞAN YANITLAR:
W: DYNDNS: Error 'RC_IP_INVALID_REMOTE_ADDR' (0x12) when talking to IP server
W:'RC_IP_INVALID_REMOTE_ADDR' (0x12) updating the IPs. (it 37)
INADYN:IP: Error '0xb' resolving host name 'ip1.dynupdate.no-ip.com'
W: DYNDNS: Error 'RC_IP_INVALID_REMOTE_ADDR' (0x12) when talking to IP server
W:'RC_IP_INVALID_REMOTE_ADDR' (0x12) updating the IPs. (it 38)
INADYN:IP: Error '0xb' resolving host name 'ip1.dynupdate.no-ip.com'
W: DYNDNS: Error 'RC_IP_INVALID_REMOTE_ADDR' (0x12) when talking to IP server
W:'RC_IP_INVALID_REMOTE_ADDR' (0x12) updating the IPs. (it 39)
INADYN:IP: Error '0xb' resolving host name 'ip1.dynupdate.no-ip.com'
W: DYNDNS: Error 'RC_IP_INVALID_REMOTE_ADDR' (0x12) when talking to IP server
W:'RC_IP_INVALID_REMOTE_ADDR' (0x12) updating the IPs. (it 40)
INADYN:IP: Error '0xb' resolving host name 'ip1.dynupdate.no-ip.com'
W: DYNDNS: Error 'RC_IP_INVALID_REMOTE_ADDR' (0x12) when talking to IP server
W:'RC_IP_INVALID_REMOTE_ADDR' (0x12) updating the IPs. (it 41)
INADYN:IP: Error '0xb' resolving host name 'ip1.dynupdate.no-ip.com'
W: DYNDNS: Error 'RC_IP_INVALID_REMOTE_ADDR' (0x12) when talking to IP server
W:'RC_IP_INVALID_REMOTE_ADDR' (0x12) updating the IPs. (it 42)
INADYN:IP: Error '0xb' resolving host name 'ip1.dynupdate.no-ip.com'
W: DYNDNS: Error 'RC_IP_INVALID_REMOTE_ADDR' (0x12) when talking to IP server
W:'RC_IP_INVALID_REMOTE_ADDR' (0x12) updating the IPs. (it 43)
INADYN:IP: Error '0xb' resolving host name 'ip1.dynupdate.no-ip.com'
W: DYNDNS: Error 'RC_IP_INVALID_REMOTE_ADDR' (0x12) when talking to IP server
W:'RC_IP_INVALID_REMOTE_ADDR' (0x12) updating the IPs. (it 44)
INADYN:IP: Error '0xb' resolving host name 'ip1.dynupdate.no-ip.com'
W: DYNDNS: Error 'RC_IP_INVALID_REMOTE_ADDR' (0x12) when talking to IP server
W:'RC_IP_INVALID_REMOTE_ADDR' (0x12) updating the IPs. (it 45)
INADYN:IP: Error '0xb' resolving host name 'ip1.dynupdate.no-ip.com'
W: DYNDNS: Error 'RC_IP_INVALID_REMOTE_ADDR' (0x12) when talking to IP server
W:'RC_IP_INVALID_REMOTE_ADDR' (0x12) updating the IPs. (it 46)
DM 500 deki newcs xml dosyası söyle:
<?xml version="1.0"?>
<newCSconfig>
<readers name="Card Readers">
<device>
<name>lower</name>
<type>sci</type>
<node>/dev/sci0</node>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<crypto-special>No</crypto-special>
<PTShandshake>No</PTShandshake>
<carddetect>Yes</carddetect>
<newcamd_port>15001</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>No</Seca-PPV>
<sid>
<allow>
<id></id>
</allow>
<deny>
<id></id>
</deny>
</sid>
<priority>round</priority>
</device>
</readers>
<radegastserver>
<enabled>No</enabled>
<port>0</port>
<allow>
</allow>
</radegastserver>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<userfile>/tmp/users.txt</userfile>
<user>
<name>Doppler</name>
<password>Dopplerpass</password>
<hostname></hostname>
<au>on</au>
<spider>no</spider>
</user>
<user>
<name>user1</name>
<password>pass1</password>
<hostname></hostname>
<au>off</au>
<spider>no</spider>
</user>
</newcamdserver>
<cache>
<emm>10</emm>
<ecm>-1</ecm>
</cache>
<debug>
<password></password>
<level>normal</level>
<type>init</type>
<output>all</output>
<logfile></logfile>
<udp_host>192.168.2.2</udp_host>
<udp_port>8099</udp_port>
<tcp_port>1001</tcp_port>
</debug>
</newCSconfig>
DM 500 deki NEWCAMD CONF DOSYASI şöyle:
# /var/tuxbox/config/newcamd/newcamd.conf
#
# newcamd mandatory settings
#
# Use emulator?
EMU = yes
# if both control word server and emulator keys are available for the
# channel, which method should be tried first?
PREFER_EMU = yes
# Autoupdate for Emu and Control Word Servers
# AU is always yes if there are betad UDS control word server
# connected to newcamd
AU = yes
#
# OSD
#
# number of seconds to show the newcamd OSD, works on enigma only
# 0 seconds -> OSD off
OSD_TIMEOUT = 6
# Recent Enigma versions come with a new option "Use http authentication"
# in the Expert Setup menu. If this option is enabled, the Enigma web server
# requires all clients to authorize themselves with username (root) and
# password (usually dbox2 or dreambox). The following option tells newcamd
# about the authentication username and password to use for the web server
# in order to be able to display its on screen information.
OSD_WEB_LOGIN = rootassword
#
# newcamd debug options
#
# dumps all ca systems used by a channel on the console
SHOW_ALL_CA_SYSTEMS = no
# print debug messages about ECM handling
DEBUG_ECM = yes
# print debug messages about EMM handling
DEBUG_EMM = no
# print debug messages about Control Word Server (CWS)
DEBUG_CWS = yes
# print debug messages about dbox2 CAM (cam-alpha.bin)
DEBUG_CAM = no
# hex dump of entire PAT
SHOW_PAT = no
# hex dump of entire PMT
SHOW_PMT = no
# hex dump of entire ECM
SHOW_ECM = no
# hex dump of entire CAT
SHOW_CAT = no
# hex dump of entire EMM (AU)
SHOW_EMM = no
# show network ECM messages being sent and received from/to the cardservers
SHOW_CWS_ECM = no
# show network EMM messages being sent and received from/to the cardservers
SHOW_CWS_EMM = no
# hex dump of EMMs with wrong signature
EMM_REPORT_WRONG_SIG = Yes
#
# newcamd optional settings
#
# Delay between reception of new control word and writing them into
# the CSA registers
# this is a default, can be changed for each individual key in keylist
DEFAULT_CW_DELAY = 100
# reload config on every channel zap
RELOAD_CONFIG_ON_ZAP = no
# reload keylist on every channel zap
RELOAD_KEYLIST_ON_ZAP = no
# write osd ca info to file
CA_INFO_FILE = /tmp/ecm.info
#
# newcamd mandatory settings for control word servers (cws)
#
# Cardserver list
#
# <hostname> <port> <username> <password> <14 byte triple-des key in hex> <lan/wan> <cardserver name>
#
# wan connections will be dropped and rebuild if newcamd is told so by camdcmd
# (see admin options)
#
# hostname = uds to use betad, port is the serial port in that case
#
# CWS = uds 1 dummy dummy
# CWS = linux.domain.com 10000 dummy2 dummy2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv
#CWS = uds 0 local local
CWS = 127.0.0.1 15001 Doppler Dopplerpass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcs
#
# newcamd optional settings for using control word servers (cws)
#
# Timeout for cardserver login in 100ms
CWS_CONNECT_TIMEOUT = 20
# Port to listen for incoming cardserver connections (reverse login)
# and/or admin connections
CWS_INCOMING_PORT = 12000
# Port to get a list of all connected cardservers, just telnet to it
CWS_DEBUG_PORT = 12001
# send keep alive messages to servers to keep connections from dying by
# unreasonable router NAT timeouts, make sure all cardservers/spiders you
# conntect to are v5.25 or newer, otherwise you'll loose connection to them,
# if set to yes
# seems this feature is commonly misunderstood, it only keeps connections
# open even if no data packets are using it for while (NAT routers tend to
# forget about established tcp connections when they are inactive), it is
# NOT to automatically reconnect to servers, see also Q&A in readme.txt
CWS_KEEPALIVE = no
#
# newcamd admin control options
# (incoming port is the same as CWS_INCOMING_PORT)
#
# <password> <14 byte des key>
#
ADMIN_PASSWORD = test 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Biraz uzun oldu ama yardımlarınızı bekliyorum..
saygılar..
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks