unsalgunay (19-09-2010), vvasi (21-09-2010)
Hadu - CCCam DVB plugin - v Beta 0.122
Changelog:
----------
0.1.2.2:
-Workaround for CCCam version 1.2.3. Hadu is now considered back as a 2.0.11 version client by default. Furthermore, it's possible to modify the client version sent to the server (see "Version" option).
Hadu - CCCam DVB plugin - v Beta 0.122
ilk mesajada eklenmiştir ayrıca diger versiyonların altına
Konu asus tarafından (25-11-2009 Saat 02:22 ) değiştirilmiştir.
unsalgunay (19-09-2010), vvasi (21-09-2010)
teşekkürler
BuGüN DosT YâRâLaNMıŞ YiNé GöNLüM HoŞ DeiL..!!
Changelog:
----------
0.1.2.3:
-EMM support (still experimental),
-possibility to indicate a static Node ID added,
-ECM process largely modified. If this new version doesn't work properly for you, get back to your former version,
-controls concerning the ECM provider completed,
-default value for the "WantEmus" option is now set to [0=No],
-memory occupation for each server lowered,
-several other bug fixes and minor enhancements.
http://www.skystar.org/arsiv/index.p...ta%200.123.zip
bulgurcali (29-03-2010), obin (20-03-2010), ozzymanborn (20-03-2010)
1 ay oldu yeni versiyon yazmadı hala @remote tamam plug-in yazmak zor iş ama insanları umutlandıran kendisi.
I Love DVBSaT
PCI Uydu Kartı Kullanıcısı
CCCAM HADU USER
Ozzymanborn AltDVB Kullanıcısıdır AltxRo'nun yeni versiyon yazacağı günün hayaliyle skystar 4.3.2 driverını kullanmaya devam etmektedir. ProgDVB ile çok hoşlaşmaz ama saygı duyar...
DVB Viewer 4.5.0.0 kullanıyorum...
Chat bölgemiz tüm üyelerimiz için açıktır.
Sky Italia izleyicisi olup donmalardan dertlidir. Polsat, D+, Zee TV'yi de ayrıca sever.
Hadu - CCCam DVB plugin - version Beta 0.124
Changelog:
----------
0.1.2.4:
-Server kurmak (Server Infos window), ekledi ekran
-DCWsOneServ genel seçeneği (gerçi bunu değiştirmek için tavsiye edilmez), ekledi
-Birçok hata bağlantı adım ilişkin giderir. bağlantıları için zaman aşımı değeri şimdi ECM resepsiyonlar için 3 kez zaman aşımı değeri olan
İç olaylar süreci içinde-değişiklikleri (yukarı ve hata düzeltmeleri temiz)
-NonStd sunucu seçeneği göreli bazı CCcam sunucu emülasyonu (olmayan bir standart CCcam sunucu davranışı ile örneğin sunucular, muhtemelen değiştirilmiş bir yazılım veya bir emulation nedeniyle) ekledi. Bir uyarı sonunda Server Infos pencerede sunucu olası bu tür hakkında görüntülenir
Monitör ve Sunucu Infos pencere boyutu Hadu.ini kaydedilir (kullanıcı tarafından değiştirilebilir),
Seçeneği iç geri varsayılan olarak daha güvenli bir değer (çok fazla çöküyor nedeniyle set NoDelay veya birkaç DVB uygulamaları ile askıda kalır). önce onu kurduğunuz takdirde Artık Hadu.ini dosya içinde, "Nodelay = 0" Yapılandırma satırı kaldırabilirsiniz
Alınan CCcam veri kontrollerinin-güçlendirme,
CCcam sunucuları (Monitor pencere) başlayan statüsü-modifikasyon,
-Basitleştirilmesi ECM PID seçimi ile ilgili. bir ECM PID şimdi (ECM listesini kullanarak Monitor penceresinde) ve eğer sonuç başarısız, tam bir standart deneyin ardından (gerçekleşen tüm olası düğümleri ve CAIDs kullanarak yani, zorunlu ise ve öncelik tanımlı kurallara saygı). "İptal manuel ECM PID seçim" menüsünden (hayır kullanılan daha fazla), kaldırıldı
ana CCcam of-destek "kontrol": komutlar 05, 0B, ... komutu 05 çekler için eski geçici çözüm kaldırıldı. Ana kontrol anda oluşur 2 saatten fazla (yani uzun oturum sonra)
-Birkaç değişiklik veya bilgileri günlüğe ilişkin ekler,
-Kullanıcı da HaduSer kullanarak, HaduSer sürüm 1.0.0.2 (veya başka santralleri yükseltme Hadu bu yeni sürümü ile lütfen artık mümkündür)
[Only registered and activated users can see links. ]
Konu ido16 tarafından (26-04-2010 Saat 20:33 ) değiştirilmiştir.
ozzymanborn (26-04-2010)
Changelog:
----------
0.1.2.4:
-server build display added (Server Infos window),
-DCWsOneServ general option added (though it's not recommended to change it),
-several bug fixes concerning the connection step. The timeout value for connections is now 3 times the timeout value for ECM receptions,
-changes within the internal events process (clean up and bug fixes),
-NonStd server option added, relative to some CCCam server emulation (i.e. servers with a non standard CCCam server behavior, probably due to a modified software or an emulation). A warning is eventually displayed about possible such kind of servers in the Server Infos window,
-size for Monitor and Server Infos windows saved into Hadu.ini (if changed by the user),
-internal option NoDelay set back to a safer value by default (due to too many crashes or hangs with several DVB applications). You can now remove the "Nodelay=0" configuration line within your Hadu.ini file, if you've set it before,
-reinforcement of the received CCCam data controls,
-modification for the status of the CCCam servers when started (Monitor window),
-simplification concerning the ECM PID selection. If an ECM PID is now forced (using the ECM list into the Monitor window) and if the result is unsuccessful, a full standard retry then occur (i.e. using all the possible nodes and CAIDs, and respecting the priority rules defined). The "Cancel manual ECM PID selection" menu has been removed (no more used),
-support of the main CCCam "checks": commands 05, 0B, ... The former workaround for command 05 checks has been removed. The main check currently occurs after more than 2 hours (i.e. long session),
-a few modifications or adds concerning the informations logged,
-for users using also HaduSer, please upgrade to HaduSer version 1.0.0.2 (or else exchanges with this new version of Hadu is no more possible)
Hadu - CCCam DVB plugin - v Beta 0.124
Konu asus tarafından (26-04-2010 Saat 20:33 ) değiştirilmiştir.
cesur22 (28-04-2010), ozzymanborn (26-04-2010)
MD5 (Hadu.dll): 2094D76F14A6867BAA00AA6710744EC5
This is essentially a correction version: several major bugs have been fixed.
Changelog:
- several major bug fixes, mainly if 2 or more servers are used (but not only),
- correct support of the server rejection for the user connection.
Possible error messages returned by the server are now displayed at the
bottom at the Server Infos window,
- "IgnoreProvFor" option added, to ignore the provider checks for one or
several CAID. It may be needed for instance, if the CAID tunneling feature
(Betacrypt<--->Nagra3) is no more working properly in your case (set
"IgnoreProvFor=1702" for the concerned server).
Hadu - CCCam DVB plugin - v Beta 0.125
Konu asus tarafından (06-05-2010 Saat 00:50 ) değiştirilmiştir.
ahrend (10-01-2011), cemocem (06-05-2010), obin (06-05-2010), ozzymanborn (06-05-2010)
Changelog:
----------
0.1.2.6:
-temporary workaround for OSCAM servers (see "OSCAMWa" option, and all the comments for it) added as a possible option,
-possibility to have only EMM active added (see "EMMAlone" option),
-the maximum number of providers per nodes has been increased to 40,
-possibility to update more than one card (i.e. node) of the same CAID for EMM purposes added,
-bug fix for nodes with too many providers,
-transparency for Monitor and Server Infos windows added (see "UseTransparency" option for more details),
-"IgnoreProvFor" option now also used for EMMs,
-providers are no more checked for Betacrypt CAIDs (ECMs and EMMs). So, you can remove your "IgnoreProvFor=1702" or "IgnoreProvFor=1722" option lines if you wish,
-bug fix for BetaCrypt EMMs process,
-bug fix concerning the DCWsOneServ option,
-bug fix for the emulator nodes recognizing,
-modification for the non standard CCCam servers and the corresponding "NonStd" option: it's now supposed to work automatically (see "NonStd" option for more details),
-bug fixes concerning different particuliar cases when several servers are in use,
-bug fix for incorrect behavior of server connections when the plugin is deactivated,
-bug fix because current ECMs were not sent immediately when a new server is activated (if several servers are active and at least one is OK),
-by default value has been changed for the MaxConnections and MaxECMPIDs options. You'll have to manually modify your current Hadu.ini file, if you plan to use these new by default values,
-number of active CCCam servers at the same time no more limited to 6 (but still limited to a maximum of 64 CCCam servers, active or not active). Set the new by default values for the MaxConnections and MaxECMPIDs options, if several servers are in use,
-bug fixes for a possible improper re-connection when the disconnection has been provoked externally (network and/or distant server),
-bug fix for Viaccess "long" ECMs (for TNTSat mainly),
-size for Monitor and Server Infos windows now also saved into Hadu.ini (if changed by the user) when pushbutton "OK" is pressed. Furthermore, the size of the columns for the different lists of these windows is now also saved,
-it's now possible to sort the nodes list into the Server Infos window for some columns,
-reject of null DCWs (processed as 'No decoding'),
-some other bug fixes and minor enhancements.
Hadu - CCCam DVB plugin - v Beta 0.126
Konu asus tarafından (10-09-2010 Saat 00:32 ) değiştirilmiştir.
egeli (18-12-2010), obin (10-09-2010), ozzymanborn (10-09-2010), piryazici (06-12-2010)
merhaba,
uzun süredir lisanslı flycccam plugin'i kullanıyordum ve server'a kaç kişi bağlı görebiliyordum. serverda aşırı yoğunluk olduğu zaman görüyordum ve server'i bana satan kişi laga luga yapamıyordu. şimdi flycccam'i engellediler. şimdi hadu üzerinden bağlantı kurabiliyorum ancak. hadu üzerinde server'a bağlantı sayısın görebilir miyim? server detaylarında CAIDprov: 140/117 gibi birşey dikkatimi çekti.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks