+ Konu Cevaplama Paneli
1 den 2´e kadar. Toplam 2 Sayfa bulundu

Konu: Flashvizard_7.02

  1. #1
    alimansur taninmis sohret sahibi uye alimansur taninmis sohret sahibi uye alimansur taninmis sohret sahibi uye alimansur taninmis sohret sahibi uye alimansur taninmis sohret sahibi uye alimansur taninmis sohret sahibi uye alimansur taninmis sohret sahibi uye alimansur taninmis sohret sahibi uye alimansur taninmis sohret sahibi uye alimansur taninmis sohret sahibi uye alimansur taninmis sohret sahibi uye alimansur - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Oct 2006
    Nerden
    YALOVA
    Yaş
    67
    Mesajlar
    3.647
    Post Thanks / Like
    Teşekkür
    240
    Thanked 4.747 Times in 850 Posts
    Tecrübe Puanı
    4623

    Flashvizard_7.02

    Flashvizard_7.02 türkçe

    DOWNLOAD
    Konu alimansur tarafından (09-02-2010 Saat 17:49 ) değiştirilmiştir. Sebep: link yenilenmiştir

  2. The Following 9 Users Say Thank You to alimansur For This Useful Post:

    alikale (31-07-2009), asiBenlik (29-07-2009), aspoljon (31-10-2009), ercani (28-01-2010), ferit118 (10-08-2009), ha15yd (05-08-2009), nacis (09-02-2010), Newworld (10-08-2010), Nokiasel (10-06-2010)

  3. #2
    arifkaptan taninmis sohret sahibi uye arifkaptan taninmis sohret sahibi uye arifkaptan taninmis sohret sahibi uye arifkaptan taninmis sohret sahibi uye arifkaptan taninmis sohret sahibi uye arifkaptan taninmis sohret sahibi uye arifkaptan taninmis sohret sahibi uye arifkaptan taninmis sohret sahibi uye arifkaptan taninmis sohret sahibi uye arifkaptan taninmis sohret sahibi uye arifkaptan taninmis sohret sahibi uye arifkaptan - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Feb 2007
    Nerden
    İstanbul
    Yaş
    69
    Mesajlar
    1.970
    Post Thanks / Like
    Teşekkür
    98
    Thanked 1.263 Times in 595 Posts
    Tecrübe Puanı
    2241

    New FlashWizard ile Dreamboxa imaj yükleme....

    How To: Dreambox Image Install With FlashWizard Program

    Dreambox Image Install With FlashWizard Pro
    1. Extract Flashwizard Pro to a folder of your Choice.
    2. Start Flashwizard with the FlashwizardPro.exe.
    3. Click the configuration tab and select you language

    4. On the same page you’ll need to fill in the Connection Parameters at the top of the page
    5. If you have not changed you password Login= root password = dreambox.
    6. To obtain your dreambox IP do the following on your dreambox remote.
    Menu-Setup-Expert Setup-Communication Setup.
    You’ll see your IP at the top of the page make a note of this and enter this IP into Flashwizard.
    Also untick the DHCP box so your Dreambox IP will never change and remain static.
    7. Now click the install a firmware tab top left

    8. Now click on the yellow folder, this will open a browser window

    Now navigate to the Dreambox image you would like to install.

    10. At the prompt select YES.

    11. You’ll now see the image been transfered

    12. And then image transfer completed.

    13. Exit Flashwizard and pull the power from you dreambox and wait for 30 seconds before reapplying power.
    14. Time to get sat in front of the TV! As your box boots you’ll see the Boot Logo Screen come up maybe a couple of times.
    15. At the Pal Screen Select Pal or the system your TV uses and then press the green button on your remote to save.
    16. Select your language and press the ok button.
    17. Select your time zone and press the green button to save.
    18. You’ll now see the Diseqc Setup menu and have 3 options to choose from
    No Diseqc for a single LNB Setup.
    Simple For a the setup of 2 Lnb’s
    Complex for Diseqc 1.2 or Usuals/Goto X
    19. If you want to use usuals keeps the goto x box ticked and enter your Longitude and latitude and press the green button to save.
    20. Now select Auto Transponder Scan. This will scan all available transponders till a valid one is found. When found press green to scan. When the scan is complete press ok.At this point you can now scan another satellite with a press of the green button or red not to. Later on in this tutorial ill be explaining how to transfer channel setting so you don’t really need to.
    21. Click exit and select a channel free to air to view.Now press the menu button-option5-reboot now, this will save your settings.
    That’s the flash and initial setup complete .
    Kimlere faydalı olduğumuzu görebilmemiz için,

    Teşekkürü tıkla, unutma.
    DİLİNİZDEN UTANMAYIN !!!

    Türkçe Dünyanın En köklü,En Zengin ve En Güzel Dillerinden Biri.Onu Yabancı Sözcüklerle Kirletmeyin.Türkçe Kullanın !!!

+ Konu Cevaplama Paneli

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Bookmarks

Yetkileriniz

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
TOPlist TopSat.Org