Konu Kapatılmıştır
1 den 7´e kadar. Toplam 7 Sayfa bulundu

Konu: SmartDVB Sürümleri

  1. #1
    serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Sep 2007
    Mesajlar
    1.244
    Post Thanks / Like
    Teşekkür
    898
    Thanked 5.603 Times in 870 Posts
    Tecrübe Puanı
    2472

    SmartDVB Sürümleri

    .
    .
    En son çıkan sürümler için son mesaja gidiniz !


    SmartDVB v0.4.0







    Fixed:

    * Scanner update would mark MIS entries with other ID incorrectly lost

    * RF scan would not take into account other defined LNB's for the current satellite and incorrect LNB limits might be set also when blindscanning

    * Some more RF scan fixes/cosmetic issues

    * Tray icon record state would not always correctly indicate recording on/off

    * Issue where channel icons would not be shown correctly when SID's were shown in the channellist (only for service name based icons)

    * Some modifications to bda.dev tbs and autodetection code, might detect specific tbs devices (also tbs 6983) better now (thanks to steven)

    * Some more fixes to scanner MIS parsing (thanks to alexi)

    * RF Scanner resource strings added (for translations)

    * MIS scan scanner (bda.dev) bug which could select the wrong mis when scanning (thanks once more to alexi)

    * Sometimes a scheduled record would use the wrong EIT entry

    * Some cosmetic changes to record name defaults

    * Updated streamreader.dll to 1.2.2.1260

    * Some minor fixes to the SmartOSD timeshift button toggles (remote now also should toggle between play/pause)


    En son çıkan sürümler için son mesaja gidiniz !

    SmartDVB v0.4.12 Release
    **Hidden Content: Reply or Thanks to see the content**


    En son çıkan sürümler için son mesaja gidiniz !




    En son çıkan sürümler için son mesaja gidiniz !

    SmartDVB v0.4.13 PowerVU destekli exe dosyası. Yukarıdaki dosyayı kurduktan sonra, bu dosya ile yer değiştiriniz ;
    **Hidden Content: Reply or Thanks to see the content**


    En son çıkan sürümler için son mesaja gidiniz !
    Konu serkanguzel tarafından (07-10-2019 Saat 07:29 ) değiştirilmiştir.
    Doğru bilginin adresi...

    Geneli ingilendiren sorulara PM'den yanıt veremiyorum. Katılımcıların yararlanabilmesi için,
    sorularımızı açık alandan sormaya özen göstermeliyiz. Anlayışınız için şimdiden teşekkürler.

  2. Likes joesoap, azimli, ViaHussun, mirturk liked this post
  3. The Following 36 Users Say Thank You to serkanguzel For This Useful Post:

    + Show/Hide list of the thanked

    1907amigo (30-07-2016), abe_yeneli (23-08-2018), aksumetin (16-11-2015), Alekse751 (10-10-2015), Aquarius6XX (16-07-2015), atlas (11-04-2015), azimli (24-07-2015), bjkssaracus (01-06-2015), Bobby (03-04-2015), bora2004 (10-04-2015), canfevzi (28-06-2015), carciofo13 (29-04-2015), dincer_88 (11-09-2015), herd (19-02-2016), hsmole (20-12-2015), Icart (11-08-2015), joesoap (07-02-2015), lasky (13-03-2015), Lostscream (21-11-2015), magician (14-07-2017), malkocoglu3 (17-10-2016), maviay (28-09-2015), mendez (24-10-2017), mirturk (16-10-2017), monoton (21-05-2015), mvural (30-11-2015), nasre (22-10-2015), nevo (02-01-2016), nickman9271 (12-04-2015), qazwsx (26-12-2015), sabridunegul (22-10-2015), snr25 (21-10-2018), tans65 (11-04-2015), tertip77 (27-01-2015), umut (15-04-2015), ViaHussun (06-02-2017)

  4. #2
    serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Sep 2007
    Mesajlar
    1.244
    Post Thanks / Like
    Teşekkür
    898
    Thanked 5.603 Times in 870 Posts
    Tecrübe Puanı
    2472
    .
    .

    En son çıkan sürümler için son mesaja gidiniz !

    SmartDVB v0.4.0.14


    TBS 6983 HD TV kartı için BlindScan2 yamasıdır.
    Kod:
    * a new test for blindscan2 support (6983 devices were not working needs tests with that)






    - SmartDVB.exe dosyasını, C:\Program Files(x86)SmartDVB\ altındaki SmartDVB.exe ile yer değiştiriniz.

    - blindscan.dev dosyasını, devices\ klasöründeki blindscan.dev ile yer değiştiriniz.


    En son çıkan sürümler için son mesaja gidiniz !

    **Hidden Content: Reply or Thanks to see the content**


    En son çıkan sürümler için son mesaja gidiniz !
    Konu serkanguzel tarafından (07-10-2019 Saat 07:30 ) değiştirilmiştir.
    Doğru bilginin adresi...

    Geneli ingilendiren sorulara PM'den yanıt veremiyorum. Katılımcıların yararlanabilmesi için,
    sorularımızı açık alandan sormaya özen göstermeliyiz. Anlayışınız için şimdiden teşekkürler.

  5. Likes ViaHussun liked this post
  6. The Following 9 Users Say Thank You to serkanguzel For This Useful Post:

    1907amigo (30-07-2016), aksumetin (16-11-2015), Aquarius6XX (27-12-2015), azimli (23-11-2015), hsmole (10-10-2017), joesoap (27-12-2015), maviay (09-01-2016), puyenugre (11-12-2022), ViaHussun (06-02-2017)

  7. #3
    serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Sep 2007
    Mesajlar
    1.244
    Post Thanks / Like
    Teşekkür
    898
    Thanked 5.603 Times in 870 Posts
    Tecrübe Puanı
    2472
    En son çıkan sürümler için son mesaja gidiniz !
    .
    .

    SmartDVB v0.4.5 beta 1 test






    fixed: dvb subtitles changes some subtitles weren't being shown correctly.

    fixed: some addon fixes, internal counter wasn't being updated so only one addon would be seen in the addon menu.

    fixed: bda.dev ms diseqc commited diseqc did not work properly.

    fixed: madvr issue where video would be hidden after showing normal (not sosd) epg (ctrl-e)

    fixed: mkv ffmpeg transcoded recordings were sometimes failing, default transcode.ini settings changes ('-fflags genpts' added thanks to sinancetinkaya for figuring this out please remove the previous mkv record entries to use this new internal default) from the ini to use the new defaults if so desired)

    fixed: remote ok/enter now expands/collapses a category when using the graphical list. This should allow better nagivation per remote.

    fixed: blindscan.dev now should also work with/tune dvb-t/c.

    fixed: various blindscanner cosmetic and user interface inconsistencies. Added frequency list and ability to start tranport stream analyser on selected frequency.

    added: blscan2 support to the blindscanner.

    added: ability to do an rfscan from the blindscanner when selecting a tree frequency (it will also try to tune the frequency to ensure we're on the sat).

    added: ability to get m3u list from the current satellite (for now only general and favorites can be retrieved). Http streaming needs to be enabled. [Only registered and activated users can see links. ] (or main.m3u) retrieves all channels for the currently selected satellite. [Only registered and activated users can see links. ] retrieves all favorites, [Only registered and activated users can see links. ] all fta stations for the current freq list). Tested with vlc on windows. Also works with android with iptv tools that are able to load .m3u urls.

    modified: some changes to http processing to improve error handling etc when requesting lots of http streams.

    fixed: cosmetic bug with graphical status bar which sometimes would paint status messages with the wrong colours.

    modified: various internal changes to try to improve stability with various devices.

    fixed: some possible remote handling issues regarding tbs devices and driver versions.

    modified: some changes to the old legacy vmr osd handling to try to improve repsponsiveness there, also some legacy memory leaks fixed there.

    added: integrated tune and manual scan to normal scanner.

    added: mpeg 2 chroma (4:2:2) detection, only tested with transport stream recordings.

    fixed: some changes to try to handle scheduling with multiple instances correctly.

    fixed: changes to stream analyser due to crash reports.

    added: option to bda.dev settings to disable tbs remote processing. If you have stability issues with your tbs device which supports a remote try to enable this settings to see if it improves stability. Restart sdvb to be sure after setting this
    option.

    fixed: some bda.dev issue when switching devices concerning retaining correct settings per device (could be especially problematic when switching devices these would not retain correct device type settings for diseqc etc).

    modified: some more scheduler bugfixes.

    added: pid recording to transport stream analyzer, 'analyzer.ts' will be created in the record folder.

    modified: some changes to the diseqc console regarding stability there. Signal status added and retune button.

    added: basic signal search/constellation to blindscanner (context menu options). Note this only works with streamreader.dll supported devices (same as the blindscanner) so keep that in mind.

    fixed: some cosmetic fixes to the normal scanner.

    fixed: additional (extra) recordings were not being stopped due to disk space restrictions.

    fixed: issue with bda.dev where prefer capture and alternative signal detection were being saved incorrectly.

    fixed: bug in streamanalyzer which would not stop recording when closing analyzer without stopping the recording.

    added: option to streamanalyzer to record 184 bytes due to special request (was quite easy enough to do )

    fixed: calling rfscanner from blindscanner did not check if diseqc/positioner was necesarry.

    modified: made default rfscan window size somewhat larger (depending on your desktop size).

    added: save diagram option to constellation view.

    added: signal constellation/analyzer is now shown on the rfscanner double click instead of the previous scan information popup.

    fixed: some fixes to the diseqc console (or motor positioner). When called from the blindscanner it will try to tune the last blindscanned frequency. Otherwise it tries to tune the last normally tuned frequency from the app or scanner.

    added: settings record option to record all dvb subtitles

    added: Options to main tools menu to also show signal analyzer directly from the app (it automatically switches to blindscan.dev, if you don't want that make sure you also use blindscan.dev to tune).

    added: option to record context menu to add some time to the end of record (5,10,15,30 or 60 minutes)

    modified: some small changes to transponder ini parsing to allow for updates from [Only registered and activated users can see links. ],

    added: device id is also added after caption tuner name (by request). This (including the tuner name) can be disabled by selecting 'tools > settings > general > do not show device name after application name'

    modified: issue with the epg search dialog which would sometimes take too long to reload when switching from the dates to stations view.

    modified: versioning of device modules is now taken from the file version instead of the previous internal version (and yes indeed file versions were from 1.0.0.0 from the start, i won't lower them since this could cause install problems otherwise).

    modified: added some checks to blindscanner/signal analyzer/rfscanner for specific streamreader.dll support (blscan/blscan2/rfscan etc).

    modified: some more changes to the diseqc console at the blindscanner dialog for blscan2 compatibility (it was freezing when blscan2 was in use).

    modified: Blindscan 2 handling modified due to reported freezes when us blscan2.

    added: initial signal monitoring setup to signal analyzer, integrated with the search/constellation dialog

    fixed: schedule task dialog now retains some modified settings (at start action, at end action, wakeup, renderless, timeout). Also renderless mode should be indicated by the ui now also.

    fixed: some inconsistencies with processing and saving mis/pls in normal scanner which at some places was still using MIS:[PLS0:1] for example. PLS string is removed also to be consistent with blindscanner/signal analyzer etc.

    modified: blindscan.dev and smartdvb now use the latest current streamreader.dll and headers with preber modification to SEARCH_RESULT (version 1.2.3.1319)

    added: secondary blindscan2 mode (minimal ranges mode gives beter UI response but the blindscan might be slower)

    fixed: rfscanner had some pesky introduced bug in latest test version

    modified: replaced satellite transponder .ini files with more current ones.

    modified: transponder.ini satellites entries updated and now all .ini's should be installed from an installer exe which should
    not create a registry entry for each install.


    En son çıkan sürümler için son mesaja gidiniz !

    **Hidden Content: Reply or Thanks to see the content**


    En son çıkan sürümler için son mesaja gidiniz !
    Konu serkanguzel tarafından (07-10-2019 Saat 07:32 ) değiştirilmiştir.
    Doğru bilginin adresi...

    Geneli ingilendiren sorulara PM'den yanıt veremiyorum. Katılımcıların yararlanabilmesi için,
    sorularımızı açık alandan sormaya özen göstermeliyiz. Anlayışınız için şimdiden teşekkürler.

  8. Likes ViaHussun liked this post
  9. The Following 13 Users Say Thank You to serkanguzel For This Useful Post:

    + Show/Hide list of the thanked

    1907amigo (06-08-2016), Aquarius6XX (28-12-2015), azimli (28-12-2015), Bobby (10-01-2016), cancano61 (17-02-2016), hotbord_34 (28-12-2015), hsmole (29-04-2017), joesoap (07-01-2016), magician (14-07-2017), malkocoglu3 (17-10-2016), maviay (09-01-2016), PrijuvaN2001 (23-12-2016), ViaHussun (06-02-2017)

  10. #4
    serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Sep 2007
    Mesajlar
    1.244
    Post Thanks / Like
    Teşekkür
    898
    Thanked 5.603 Times in 870 Posts
    Tecrübe Puanı
    2472
    En son çıkan sürümler için son mesaja gidiniz !

    .
    .

    SmartDVB v0.5.0.1 RC

    SmartDVB v0.5.0.11 RC

    SmartDVB v0.5.0.29 RC



    This version contains mostly stability improvements and various bug fixes. If you previously had problems with some devices or other stability problems, it's
    0.5.0 Release contains various fixes to DVB-T2 PLP handling and adds T2-MI support.
    This version contains mostly stability improvements and various bug fixes. If you previously had problems with some devices or other stability problems, it's recommended to try the current 0.5.0 RC version. Some of the main changes are:

    - overall improved stability.
    - bda.dev fixes/improvements should be compatible with more devices now.
    - HEVC compatibility improved, some current HEVC codecs do not seem enough yet and might cause crashes or freezes, if you have problems try the LAV HEVC decoder.
    - improved blindscanner interface
    - better video stability.
    - audio A/B channel selection button to the graphical status bar.
    - scheduler conflict detection and resolving.
    - signal analyzer and monitoring including a constellation diagram.
    - some timeshift changes should make timeshift more stable.
    - Improved MDAPI compatibililty and fixes.












    v0.5.0.29 RC - 23 Ocak 2017

    Bu sürüm halen mevcut çalışmaların geliştirilmesiyle ilgilidir.

    modified: Hevc improved, more aac codecs could work (with replacement snartavscr.ax,
    make backup to be surw you don't run into problems). Mainconcept hevc also works.

    added: Madvr support for last madvr versions added. For madvr make sure you have display scaling for w8, w10 disabled on exe properties.

    added: favorites auto remote added and much more fixes for speed etc.

    updated: Bda updated to start quicker with some devices that has initial delay at start. With vmr7 might be more compatible again, was broken perhaps.

    modified: http streaming improved and more stable, also m3u works better now for vlc and some other clients,

    added: options added to optimize http streaming for clients, vlx works very well and fast with http streaming.



    v0.5.0.11 RC - 8 Kasım 2016

    fixed: For EVR Renderer, evr switch fix.



    v0.5.0.1 RC - 14 Ekim 2016

    fixed: polsat epg was broken.
    fixed: blue epg would fail when moving page up etc.
    fixed: scheduler display bug which would sometimes show some garbled epg text in the list.
    added: epg title search/imdb search and clipboard text copy to main epg pane and epg search dialog. the imdb search string is configurable through the settings.ini (in case the imdb search string would change you should be able to change the default search string here).

    modified: scheduler now shows actual scheduled times in larger red font.
    added: program guide search toolbar button.
    fixed: schedule add task dialog cosmetic issues fixes.
    fixed: issues when using scheduler timeout messages which could result in erratic behaviour.
    fixed: command bar position saving was broken (while at it added main window epg/record column size saving to settings).
    added: epg search dialog toolbar button.
    added: date entry for recordings to the record context menu.
    added: scheduler conflict management (required almost a total rewrite of the scheduler)(requires lots of testing). This needs to be tested and can optionally be enabled through the scheduler settings.

    added: import pre 0.4.5 scheduler tasks to scheduler settings.
    modified: internal changes to signal handling to try to improve app responsiveness. If you have app stability issues related to signal handling please let me know.
    fixed: PIP stay on top was not working correctly
    fixed: m3u list channel change would fail when multiple devices are used. (untested bugfix)
    added: A/B audio channel selection to application status bar (only graphical status bar). Audio processing filter needs to be enabled (settings > connection)
    fixed: some signal monitor/analyzer cosmetic graph update issues
    modified: some changes/fixes to mdapi unloading, let me know if this causes issues/exception when exiting the app or switching devices etc.

    fixed: normal bda.dev (tbs only) pls tuning seemed broken due to some debug code leftovers.
    added: option to scheduler settings to enable scheduler conflict resolving.
    fixed: signal constellation would not be repainted on window resize.
    modified: moved signalanalyzer string to resources.
    fixed: issue with scrollwheel and volume when app started without tune.
    modified: streamreader.dll updated to version 1.2.3.1382
    fixed: some changes to signalanalyzer signal monitoring which seemed erratic here and there.
    fixed: added a/b selection was not working properly
    modified: Germany.Unitymedia NRW transponder .ini updated.
    modified: some internal changes
    modified: blinscan.dev updated to latest streamreader sdk.
    fixed: some small fixes to graphical channel list (dragging in single channel selection mode should work better now).
    fixed: fixes
    modified: some changes to scanner channels process/update logic.
    modified: added support for MainConcept HEVC decoder you need to manually add "video9=MainConcept HEVC Video Decoder,{A8AD11CE-3CBD-4E8E-9786-6029F372A5D0},HEVC,Video" to your filters.ini (or clean setup)

    fixed: audio a/b statusbar selection would not correctly play both channels.
    fixed: null (client) device wasn't working properly for other device types.
    fixed: blindscanner in blscan2 max ranges mode would scan some frequencies too much, this could make this scan with channels faster if your device supports blscan2.
    fixed: fixes.
    fixed: dvb file play bug which would cause buffer overruns there.
    modified: some changes to EVR handling.
    fixed: dvb file play mode loop setting (directshow) was not being retained at the next startup.
    fixed: fixes/changes to exit process since there are occacional crashes here. Please let us know if you still have this issue.
    modified: some changes to osd epg, always enforced non transparency etc previously it would take too much memory and could create problems with the renderer (delays).
    fixed: PIP main tab window clicks were crashing due to recent changes to the single click drag and drop.
    fixed: PIP main tab channel switches had issues with mdapi.
    modified: version bump to 0.5.0, improved stability warrants this.
    fixed: some more exit modifications and fixes to bda.dev direct mode.
    fixed: some more stability changes.




    En son çıkan sürümler için son mesaja gidiniz !

    **Hidden Content: Reply or Thanks to see the content**


    En son çıkan sürümler için son mesaja gidiniz !
    Konu serkanguzel tarafından (07-10-2019 Saat 07:33 ) değiştirilmiştir.
    Doğru bilginin adresi...

    Geneli ingilendiren sorulara PM'den yanıt veremiyorum. Katılımcıların yararlanabilmesi için,
    sorularımızı açık alandan sormaya özen göstermeliyiz. Anlayışınız için şimdiden teşekkürler.

  11. Likes ViaHussun liked this post
    Dislikes surikata disliked this post
  12. The Following 18 Users Say Thank You to serkanguzel For This Useful Post:

    + Show/Hide list of the thanked

    67sefa (15-10-2016), aksumetin (15-10-2016), Aquarius6XX (22-10-2016), Bilinmeyen (20-06-2020), doomstime (14-11-2016), drejm (26-10-2016), hotbord_34 (06-11-2016), hsmole (29-04-2017), laoba (10-01-2017), magician (14-07-2017), malkocoglu3 (17-10-2016), maviay (14-12-2016), nasre (14-02-2019), pluton (28-01-2021), PrijuvaN2001 (24-12-2016), surikata (02-01-2017), ViaHussun (06-02-2017), zyadas (16-10-2016)

  13. #5
    serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Sep 2007
    Mesajlar
    1.244
    Post Thanks / Like
    Teşekkür
    898
    Thanked 5.603 Times in 870 Posts
    Tecrübe Puanı
    2472
    En son çıkan sürümler için son mesaja gidiniz !

    .
    .


    SmartDVB v0.5.0.64 Portable x64


    SmartDVB v0.5.0.60 Release












    En son çıkan sürümler için son mesaja gidiniz !

    **Hidden Content: Reply or Thanks to see the content**


    En son çıkan sürümler için son mesaja gidiniz !
    Konu serkanguzel tarafından (07-10-2019 Saat 07:34 ) değiştirilmiştir.
    Doğru bilginin adresi...

    Geneli ingilendiren sorulara PM'den yanıt veremiyorum. Katılımcıların yararlanabilmesi için,
    sorularımızı açık alandan sormaya özen göstermeliyiz. Anlayışınız için şimdiden teşekkürler.

  14. Likes ViaHussun, maviay, nasre, teyin liked this post
  15. The Following 21 Users Say Thank You to serkanguzel For This Useful Post:

    + Show/Hide list of the thanked

    abe_yeneli (29-12-2020), Aquarius6XX (07-02-2017), atlas (06-02-2017), azimli (06-02-2017), Bilinmeyen (19-10-2017), Bobby (14-12-2017), hsmole (29-04-2017), jonjon (28-03-2017), karakobra (01-10-2017), maviay (06-02-2017), mendez (24-10-2017), nasre (07-02-2017), PrijuvaN2001 (04-09-2017), skorpios268 (17-07-2017), snr25 (21-10-2018), teyin (26-02-2017), tokersari (06-02-2017), vasi54 (06-03-2020), ViaHussun (06-02-2017), vvasi (09-12-2017), x 1 (07-02-2017)

  16. #6
    serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Sep 2007
    Mesajlar
    1.244
    Post Thanks / Like
    Teşekkür
    898
    Thanked 5.603 Times in 870 Posts
    Tecrübe Puanı
    2472

    SmartDVB Portable Sürümler

    En son çıkan sürümler için son mesaja gidiniz !

    .
    .


    SmartDVB Portable Sürümler




    SmartDVB v0.5.1.1 Portable x64 Beta Test



    The first x64 beta build of SmartDVB is now available for download. The build includes an initial port of channel listing and epg to unicode. The epg database smarteit.db has been modified to allow for full UNICODE EPG/EIT support. Other than that the x64 build uses the same baseline code as the 32 bit version and hence the feature set for both versions should be about the same. Care has been taken to support most of the legacy application functionality, including blindscan and plugins.
    This version also improves video quality and error recovery, including better 4:2:2 handling/processing.

    The build is not provided as an install but as a portable .zip archive. The installation process is simple.

    * Just extract the archive and register the included filters

    * Run filters\registerfilters.bat with administrator priveleges (for example by right clicking on the registerfilters.bat and selecting 'run as administrator' with the file explorer)

    * The x64 build requires x64 decoder versions (both video and audio), previously installed 32 bit versions of decoders will not be seen by the 64 bit version, so please make sure the appropriate x64 versions of the codecs you wish to use with the x64 build are installed.

    The 64 bit executable SmartDVB.exe should now be runnable.

    It is not required to install the 32 bit version alongside the x64 version, the two versions should run independent of one another.

    Please note device support for the x64 build is limited for some devices, not all (legacy) device manufacturers have x64 bit sdk's available. Skystar.dev is is not available so technisat skystar devices will not be fully functional. Tevii devices will also only, possibly, work with the tevii (bda) device type, the tevii.dll required for the sdk is also not available as a x64 dll.







    SmartDVB v0.5.1.38 Portable x86 Beta Test



    This 32 bit portable update should have all the recent 0.5.1 x64 build changes, such as unicode support, and (additional) fixes. Some added features or improvements include:

    * Better zoom capabilities through a zoom dialog. You can save zoom settings on a per channel basis.

    * Somewhat better H.264 4:2:2 support, but your mileage may still vary depending on the used codecs, as usual LAV is recommended.

    * XMLTV EPG/EIT importing (experimental for now, if you find issues here please report them).





    En son çıkan sürümler için son mesaja gidiniz !

    Dosyayı rar'dan çıkarınız ve C:\ altına atınız. PC'de SmartDVB'nin setup'lı sürümlerinden biri kurulu değilse, "Filters" kaydı da yapmak gerekir.
    **Hidden Content: Reply or Thanks to see the content**


    En son çıkan sürümler için son mesaja gidiniz !
    Konu serkanguzel tarafından (07-10-2019 Saat 07:35 ) değiştirilmiştir.
    Doğru bilginin adresi...

    Geneli ingilendiren sorulara PM'den yanıt veremiyorum. Katılımcıların yararlanabilmesi için,
    sorularımızı açık alandan sormaya özen göstermeliyiz. Anlayışınız için şimdiden teşekkürler.

  17. Likes ViaHussun liked this post
  18. The Following 10 Users Say Thank You to serkanguzel For This Useful Post:

    abe_yeneli (23-08-2018), Aquarius6XX (10-12-2017), commando (02-03-2018), hotbord_34 (19-10-2017), maviay (19-11-2017), nasre (19-10-2017), sadrazamsd (18-03-2018), snr25 (21-10-2018), ViaHussun (19-10-2017), vvasi (09-12-2017)

  19. #7
    serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel taninmis sohret sahibi uye serkanguzel - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Sep 2007
    Mesajlar
    1.244
    Post Thanks / Like
    Teşekkür
    898
    Thanked 5.603 Times in 870 Posts
    Tecrübe Puanı
    2472
    .
    .


    SmartDVB Portable Sürümler




    SmartDVB v0.5.3.26 Portable x64 ve x86 Beta Test




    0.5.3 x64/x86 portable versions are now available. The build includes many fixes and the following improvements:

    * Added support for external splitters, including LAV Splitter support. Please note that LAV Splitter support is experimental and initial connection is slow compared to the default splitter (SmartAVSrc). So if you care most about tuning speed, and not so much about picture quality, do not use the LAV Splitter

    * Added windowed EPG viewer

    * Better support for 4:2:2, including 4k and 8k

    * Added EVR-CP (Custom Presenter) video renderer, with support for HDR and external shaders. Including support for rendered subtitles (DVB/Teletext Subtitles)and exclusive fullscreen mode.

    * Improved 4:2:2 support (LAV Splitter in combination with the LAV Video Decoder plays 4:2:2 quite well)

    * Improved 4k and 8k support

    * MDAPI improvements/enhancements (including x64 build fixes)

    * Extended zooming support dialog. Zoom settings can be saved per channel.

    * Improved MadVR support (also works well with the LAV Splitter)

    * Support for external multiplexers (including Microsoft MPEG2 demux, Elecard demux, Mainconcept demux etc)

    * Graph performance settings (experimental, leave the default settings if you don't really know what you're doing here)

    * Blindscan.dev improvements/fixes, added blindscan.dev device settings to set the defualt blindscan.dev tuning method.

    * Initial (experimental) CAM Menu support for TBS CI CAM devices only. Please report if you have issues with this feature as it has not been tested extensively.

    * Improvements to DVB Transport Stream file play mode video quality/stability, play HEVC DVB File option added. Please do not use transport stream recordings of sizes lower than about 100Mb as otherwise transport stream playback can be somehwat unstable.

    * Improvements to SmartOSD default scaling. Default OSD graphics changed, including EPG.


    Please note that this is a beta build, mainly due to the new features like EVR-CP which have not been tested extensively yet, otherwise the app should be stable.






    Dosyayı rar'dan çıkarınız ve C:\ altına atınız. PC'de SmartDVB'nin setup'lı sürümlerinden biri kurulu değilse, "Filters" kaydı da yapmak gerekir.
    **Hidden Content: Reply or Thanks to see the content**
    Doğru bilginin adresi...

    Geneli ingilendiren sorulara PM'den yanıt veremiyorum. Katılımcıların yararlanabilmesi için,
    sorularımızı açık alandan sormaya özen göstermeliyiz. Anlayışınız için şimdiden teşekkürler.

  20. Likes otokoc liked this post
  21. The Following 16 Users Say Thank You to serkanguzel For This Useful Post:

    + Show/Hide list of the thanked

    abe_yeneli (09-10-2019), Aquarius6XX (26-10-2019), beyazsoy (11-10-2019), commando (21-10-2019), masty (20-01-2020), mertcan_60 (29-04-2020), nasre (29-11-2019), otokoc (15-12-2020), pluton (28-01-2021), puyenugre (11-12-2022), Romanson (16-11-2020), simazambrosso (27-05-2020), skorpios268 (09-10-2019), vasi54 (06-03-2020), vvasi (07-10-2019), zyadas (07-10-2019)

Konu Kapatılmıştır

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Tags for this Thread

Bookmarks

Yetkileriniz

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
TOPlist TopSat.Org