abe_yeneli (06-05-2018), BURAK 20 (03-03-2018), dijitalxyz (25-04-2021), hotbord_34 (02-12-2017), pire (08-01-2018), ViaHussun (15-06-2018), vvasi (01-12-2017)
En son çıkan sürümler için son mesaja gidiniz !
.
.
TSreader v2.8.51 Lite + Crack
Sevgili arkadaşlar,
Ayrıntılı transponder analizine imkan veren TSReader 'in kurulum aşamalarını izah etmeye çalışacağım.
Önce, TSreader sürüm farklarına göz atalım ;
[Only registered and activated users can see links. ]
Resimden görüldüğü üzere, Lite sürümlerinde kullanım özellikleri oldukça kısıtlıdır.
Örneğin; Yukarıdaki özellik tablosunda, 13ncü satırda; "Records the transport stream( *.ts ) to a file" yani kaydetme özelliğinin "lite" sürümde olmadığı anlaşılmaktadır. Verdiğim örnek gibi, lite sürümde olmayan özelliklerden herhangi biri kullanılmak isteniyorsa, Standart yada Profesyonel sürümlerden birini edinmek zaruri olmaktadır. TSreader Standard Full sürümü buradan indirip kullanabilirsiniz ;
[Only registered and activated users can see links. ]
1. TSReader 'i aşağıdan indirip, C:\ altına kuruyoruz.
( Burası önemli ! Program Files(x86) altına kurmayın, direkt C:\ altına kurunuz )
2. Kurulumda program kısa yol eklemediyse, C:\TSReader\ içinden TSReader.exe dosyasını bulup, sağ klik, masaüstüne kısayol ekle yapıyoruz.
3. Gelen bu ekranda, listeden TV kartımızı seçmeliyiz.
( Burası önemli ! TV kartının modelini yanlış seçerseniz, TSReader çalışmadan hata verip kapanacaktır. )
TV KARTI SEÇİM RESİMLERİ :
Prof Tuners 7301 TV kartı kullandığım için, TV kartının seçim satırı, resimde görüldüğü gibidir ;
( Resimlerin üzerine tıkladığınızda, resim büyüyecektir !... )
Program çok akıllı !... Eğer doğru TV kartını seçtiyseniz, TSReader bir sonraki defa çalıştırıp, herhangi bir frekans analizinden sonra, File > Select source... girip, TV kartımızın bulunduğu satıra gelecek olursak, TSReader TV kartının tam model tanımını da oluşturmaktadır.
ÖNEMLİ : TSReader ile frekans analizine başlamadan önce, C:\TSReader\Satellites\ *.ini dosyaları içinde kayıtlı frekansları tek tek güncelleyiniz. Yani kullanılan bütün frekanslar canlı frekanslar olmalıdır. Canlı frekansları elle tek tek güncellerken, flysat'tan yararlanabilirsiniz. EĞER YALNIZCA CANLI FREKANSLARI GİRMEZSENİZ TSReader SİNYAL OLMAYAN FREKANSLARDA HATA VERİR !
DISEQC SWITCH SEÇİMLERİ :
( TSReader v2.8.50 sürümlerinden itibaren Diseqc 1.1 protokolünü de desteklemektedir !... )
ANALİZ EKRANI VE PARAMETRELER :
Diseqc Port 1 : Türksat ;
Diseqc Port 2 : Hotbird ;
Diseqc Port 3 : Eutelsat 70,5E ;
Diseqc Port 4 : Eutelsat 7A ;
VLC ile açmak için; Playback sekmesini açıp, VLC seçilip, açılan setting penceresinden, VLC'nin kurulum klasöründeki, VLC.exe dosyası gösterilip kaydedilmelidir. Sonra yandaki küçük resim pencerelerine çift tıklandığında, ilgili kanal VLC ile açılacaktır.
Başka bir frekansın analizini yapmak için; File sekmesinden Restart Source 'e tıklanırsa, TSreader'i kapatmadan başka bir frekansın analizine geçmek mümkün olacaktır.
TSreader v2.8.51 Lite sürümünde, biss şifreli kanalları açmak ;
* TSreader'i kurduktan sonra, biss şifreli kanalları açmak için, Plugins sekmesi altından biss giriş penceresi açılarak, kanalın biss şifresi girilebilir.
TSreader Version 2.8, build 51
All: The Alitronika ASI source module now supports the AT4R1 ASI to USB adapter
All: The HDHomeRun DVB-T source module now works correctly with DVB-T2 signals without reporting a false failure to lock
All: Recording and playing streams with E-AC3 audio now correctly records the audio stream
Std/Pro: Improvements to the H.265 decoder. Interlaced video is now decoded correctly
Std/Pro: Fixed an issue when exporting to XML where a long rating string in an EIT event could corrupt the event's start date
All: H.264 and H.265 decoders now display a "Wait..." thumbnail before the thumbnail is decoded. MPEG-2 video decodes very rapidly but H.264 and especially H.265 with a 4K picture can take a second or more to get a thumbnail. This makes it much clearer that TSReader is working on it
All: The YUV to RGB conversion required to get a thumbnail on MPEG-4, H.264 and H.265 video is significantly faster
Pro: Fixed an issue with CEA-708 caption service numbers greater than six
All: DVB NIT entries in the tree-view now display the network name if transmitted
All: The DVB NIT maximum multiplexes was 2,048. This has now been increased to 8,192 to handle some European DVB-C networks
All: Added support for the ASI input port on the Alitronika AT-290 DVB-S modulator
Std/Pro: Added the ability to view the MPEG-2 start codes or the H.264/H.265 NALU codes. This can be very useful for finding strange problems in video streams especially when some NALU codes are missing
All: Added option to right-click a "Decoder Disabled" thumbnail in order to enable that decoder
Std/Pro: Right clicking a video thumbnail now displays menu options to allow quicker access to decoder settings, offers to refresh thumbnails and allows the thumbnail size to be changed
Std/Pro: Changing the thumbnail size now refreshes the thumbnails
All: Alitronika input ASI devices that use DvsStation V4 are now supported using the AlitronikaASI_v4 source-module
All: Added support for the TBS 690A four-port ASI input card
Pro: Cleaned up the caption decoder messages and made the caption display easier to read by adding some color
All: Some DVB-T NIT entries carry terrestrial system delivery decoder that's all ones (which means reserved). This was incorrectly shown as -0.0MHz
Std/Pro: The RTP and HRTP source modules now count the number of RTP packets lost at the IP level
Pro: The RTP and HRTP source modules can now log the RTP packet loss to a comma-separated file
Pro: TSWatcher: Added the ability to include thumbnails in the alarm report
Pro: TSWatcher: Added a new function to generate a standalone webpage containing thumbnails from all multiplexes being monitored
All: Fixed an issue where service names on DCII muxes would sometimes be blank
All: Depreciated support for Dish Network switches and changed the code to support DiSEqC 1.1 switches instead which support up-to 16 satellite inputs
All: Updated links to reference the new tsreader.com website
Std/Pro: Removed documentation from the installer. TSReader documentation is all on-line now
Lite: Video resolution is now exported to HTML for H.264 video
En son çıkan sürümler için son mesaja gidiniz !
**Hidden Content: Reply or Thanks to see the content**
En son çıkan sürümler için son mesaja gidiniz !
Konu serkanguzel tarafından (15-06-2018 Saat 00:38 ) değiştirilmiştir.
Doğru bilginin adresi...
Geneli ingilendiren sorulara PM'den yanıt veremiyorum. Katılımcıların yararlanabilmesi için,
sorularımızı açık alandan sormaya özen göstermeliyiz. Anlayışınız için şimdiden teşekkürler.
abe_yeneli (06-05-2018), BURAK 20 (03-03-2018), dijitalxyz (25-04-2021), hotbord_34 (02-12-2017), pire (08-01-2018), ViaHussun (15-06-2018), vvasi (01-12-2017)
.
.
TSreader v2.8.52 Lite
Version 2.8, build 52 ;
All: The UDP multicast source modules (UDP, RTP, HRTP) and the TCP/IP source module now accept udp://addr: port and tcp://addr: port on their command-lines. This is predominantly for support of CrazyScan working with TSReader Pro
Pro: RTP packet loss logging now logs the time difference (in milliseconds) between the packet where loss was detected and the prior packet
Pro: Fixed a crash with badly formatted SCTE-35 messages
Std/Pro: Fixed an issue with the TCP/IP source module where a command-line address that couldn't be connected to resulted in a looping error message
All: If the HTTP source module detects a webpage without any M3U tags (such as an error 404), it will now display the webpage for better diagnostic information. The webpage rendering is done inside TSReader and doesn't start a web browser
All: Added support for TBS-5580 USB multi-standard tuner
All: Added commas to separate the thousands and millions in the multiplex bit rate. This makes reading the mux-rate much easier
Pro: The tier level in SCTE-35 cue messages is now decoded
All: Fixed a bug that caused thumbnails to disappear when the thumbnail refresh rate was zero (one thumbnail pass when TSReader starts) and the PMT version number changes
Std/Pro: Added the multi protocol IPTV source module. It handles HRTP, HTTP, RTP, TCP and UDP streams with a unified stream selection interface. More information is here
All: When the HTTP source is reading a list of transport stream files from an M3U playlist and it reaches the end of this list, it displays a warning that the end of the playlist has been reached. This makes it much more like the File source module's behavior. This message isn't displayed when reading plain HTTP streams without an M3U playlist or with a playlist that updates such as when reading a live HLS/MPEG-DASH stream
Pro: Fixed an issue with the Closed Caption decoder where multiple languages might cause display corruption of EIA-608 captions
Pro: Fixed an issue with TSWatcher that would cause it to hang on a mux if the mux contained rapid SCTE-35 CUE messages
Pro: Changed the display of segmentation_upid in SCTE-35 CUE messages to hex since this field can contain binary data. The specification is quite unclear as to proper decoding of this field so this is a good balance
All: TSReader is now aware of PotPlayer and will shut it down like VLC if that is chosen to play live video versus VLC via Playback/VLC/Settings. PotPlayer is free and very good media player that decodes faster than VLC. TSReader should be pointed at the C:\Program Files\DAUM\PotPlayer\PotPlayerMini.exe file
All: Added support for VLC 3.0
All: Updating decoding of the DVB E-AC3, S2 delivery and NIT service list descriptors
All: Frame rate and aspect ratio from H.264 & H.265 video is now shown if present in the stream
All: Added support for all four tuners on the DVB-T and ISDB-T Silicon Dust HDHomeRun Quattro tuners
All: Depreciated support for recording program streams. This is really a dead format and there are much better third party programs that can be used to generate these files
All: Added support for ALPTS files. This format allows MPEG-2 transport stream files to be compressed by removing the sync byte, removing similar PID headers and dropping NULL packets - all done in such a way that this data can be recovered exactly as recorded - in other words lossless compression. Compression amount depends on the number of NULL packets
Std/Pro: Added command-line utilities ALPtoTS.exe and TStoALPTS.exe to convert these formats in addition to the support inside TSReader
**Hidden Content: Reply or Thanks to see the content**
Doğru bilginin adresi...
Geneli ingilendiren sorulara PM'den yanıt veremiyorum. Katılımcıların yararlanabilmesi için,
sorularımızı açık alandan sormaya özen göstermeliyiz. Anlayışınız için şimdiden teşekkürler.
abe_yeneli (04-06-2018), dijitalxyz (25-04-2021), dz-hack (18-05-2018), ViaHussun (15-06-2018)
.
.
TSreader v2.8.53 Lite
Version 2.8, build 53 ;
All : Added support for the following TBS products: 5301 (HDMI to H.264 encoder), 6290SE (2xDVB-T/T2/C), 6301 (HDMI to H.264 encoder), 6304 (4xHDMI to H.264 encoder), and 6909 (8xDVB-S/S2)
Std/Pro : Added support for Media Highway 2 format EPG. This is enabled with the -EM switch
All : Fixed an issue with the aspect ratio and frame rate for H.264 video when a sequence scaling matrix was present
All : Increased the size of the description column in the stream selection dialog used for HRTP, RTP, TCP and UDP protocols
All : Added support for the TBS 5590 USB probe. This device supports DVB-ASI, DVB-S/S2/S2X, DVB-T2/T2, DVB-C2/C2, ISDB-T and QAM-B
Std/Pro : Added an option to XMLTV export that allows selection between channels and EPG events mixed together (the format supported by TSReader for many years) and channels first, followed by programs. Additionally added an option to the the -X+nn switch to allow selection between these modes
Pro : Added an option to TSWatcher to log the exchange with SMTP email servers. This can be useful in debugging email sending issues
All : Added a source module for SAT>IP DVB-T servers
Pro : Fixed a problem in TSWatcher where the wrong command line would be set when importing 8VSB and QAM-B channel lists with channel descriptions
Pro : Fixed an issue with Korean closed-captions containing multiple user-data streams with the 0x64088408 prefix
Std/Pro : Fixed an issue with the multicast UDP, RTP and HRTP sources where source specific streams using IGMPv3 via the the command-line would return an erroneous error message
Pro : Added a new switch -9 to both TSReader and TSWatcher to allow multiple UDP Multicast lists
Crack dosyasının hazırlatılması için çaba harcayan @Viahussun ustaya teşekkür ederiz.
TSReader v2.8.53 Lite + Crack dosyası
**Hidden Content: Reply or Thanks to see the content**
Konu serkanguzel tarafından (16-07-2018 Saat 19:46 ) değiştirilmiştir.
Doğru bilginin adresi...
Geneli ingilendiren sorulara PM'den yanıt veremiyorum. Katılımcıların yararlanabilmesi için,
sorularımızı açık alandan sormaya özen göstermeliyiz. Anlayışınız için şimdiden teşekkürler.
abe_yeneli (19-06-2018), Bilinmeyen (15-06-2018), commando (15-06-2018), dijitalxyz (25-04-2021), Gudu (26-08-2018), ViaHussun (15-06-2018), vvasi (15-06-2018)
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks