Ilk önce [Only registered and activated users can see links. ] adresinden account alacaksiniz bedava
[Only registered and activated users can see links. ]
asagidaki resimde görünüdügü gibi iki kutucuklari isaretleyin
ve k****mak istediginiz isimi ve e-mailinizi yazin
e-mailinize activation gelecek sonra
herseyi yazdiktan sonra asagian create account tiklayin
sonra böyle bir resim gelecek account yapildi diye
simdi E-Mailinize gelen bir link var ona tiklayip activ yapin
simdi account confirmed diye bir uyari geliyor
orada yukari sagda login yapiyorsunuz
ve My Servicese giriyoruz
simdi Add Host Services tikliyoruz
ordanda Add Dynamic DNS Host
simdi asagidaki resime dikkatli bakarsaniz
sagda ückene tiklayinca asagiya dogru ekran aciliyor
oradan istediginz birisi secin ben dyndns.biz sectim
sol tarafada isim olarak sismanoglan verdim
Enable Wildcard: burayi isaretleyin
yani bu resimdekigibi olacak
Sorada Add Host tiklayin
simdi hostname creaded ekrani geliyor
DNS Islemi buraya kadar
simdi sirada router de
burda yapmaniz gerken iki sey var
1- actiginiz dyndns adresini ve sifresini routere kayit etmek
2- Port acmak ben 2499 yaptim
asagidaki örneklerden görebilirsiniz
simdi birinci islem portforwarding yani portweiterleitung ( port yönlendirme )
benim routerde UDP acik olmadigi icin oradan news seciyorum ve orayada recieverinizin ip sini vereceksiniz
ben 192.168.0.151 yaptim
asagida resime bakarsaniz News olarak geldi
portlar 119 - 119
reciever ip si 192.168.0.151
simdi News olan yeri editliyecegiz
1 yazan yeri isaretleyip edit Service tikliyoruz
gelen yere asagidakigibi eliniz ile yazin UDP Service Typ de UDP olacak
portlari ben 2499 - 2499 yaptim
siz isterseniz 2500 - 2500 yapabilirsiniz
size kalmis birsey
recieverin ip si 192.168.0.151
bu ayarlari degistirdikten sonra
kayit edin yani save
simdi asagidakiki görüntü gelecektir
port acma isi bitti
sira DNS i kayit yapmaya geldi
asagidaki resime bakarsaniz
DNS de aldigimiz accountu buraya kayit ediyor ve
eger wildcard isaretliyoruz
sonra save yaptinizmi islem bitti
simdi iki sey daha var onu yapmak zorunda deyilsiniz
Recieverinizin FTP ve TELNET acma
FTP neye gerekli :
eger baska bir yerdesiniz ve recieverinize bir ayar yada ne bileyim
yeni birini kayit etmek icin lagzim
Telnet ne icin gerekebilir :
diyelimki arkadasiniza gittiniz oradan telnet üzeri kendi evinizdeki
recieveri reboot yapabilirsiniz bu tek bir örnek
eger bunlari yapmakta kararli iseniz
13. resimdekigibi news olarak seciyorum ben
sonrada
editliyorum FTP VE TELNET olarak
sadece burada portlar degisik olacak
FTP 20-21 veya 21-21
Service Type TCP
TELNET 23-23
Service Type TCP
herseyi dogru yaptinizsa asagidakigi bir görüntü ortaya cikiyor
[/CENTER]
Dreamboxda gbox icin lazim olan dosyalar
Bu örnek Gemini image icindir
Flashfxp ile ile Dreamboxunuza baglandik tan sonra
gbox emu >> var/bin klasörüne gelmesi lazim ve chmod 755 yapilacak
gbox.cfg + softcam.cfg + cwshare.cfg >> bunlari ücü de oldugu gibi var/keys klasörüne atilacak ,bunlarda chmod 755 yapilmasi gerek deyil
gbox_cam.sh >> bu ise var/script icine atilacak ve chmod 755 yapilacak
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
Bu hazir dosyayi tmp dosyasina atin ve kumandadan manuel instal edin kendisi gereken yerlere yükleyecektir,
Sizlere sadece cwshare.cfg dosyasini kendi bilgilerinizi yazmak kaliyor
cwshare.cfg deki ayarlar
Burasi aciklama ,asada original halini görebilirsiniz
M: { buraya kendi dyn adresiniz gelmesi lazim { buraya kendi passinizi yazmalisiniz }}
# Internet Friends port range password cod
D: { buraya ise paylasim yaptiginiz arkadasinizin ipsi yazilmasi lazim { burasi paylasim yaptiginiz port { burasi arkadasinizin passi { 5 5 }}}} 5 5 olan yer ise su sekil >
ilk 5 olan kendi kartinizi 5 kere devam verme yetikisi veriyorsunuz
ikinci 5 olan ise paylasimdan aldiginiz kartlari devam verme yetkisi vermis oluyorsunuz
I: { 05 } # burasi 5 uzaklikdaki paylasimdan yayin alma ayari
N: { 00 01 03 00 3000 5000 }
X: { 10 } # burasi ayni kart dan 10 tanesine müsade et
G: { 0500xx00 AAAA } # burasi ise paylasimda öncülük olarak kimin kartindan alsin ayari ben ornek ( 0500xx00)id lerini aldim misal olarak AAAA yerine ise kart sahibinin Box id sini yazman lazim
G: { 0500xx00 AAAA }
G: { 0500xx00 AAAA }
N: { 01 01 03 00 4000 6000 }
#
,
Burasi ise olmasi gereken ayar
M: { benim.dyndns.org { 12345678 }}
# Internet Friends port range password cod
D: { arkadasim.dyndns.org { 2499 2499 { 12345679 { 5 5 }}}}
I: { 05 }
N: { 00 01 03 00 3000 5000 }
X: { 10 }
G: { 0500xx00AAAA }
G: { 0500xx00 AAAA }
G: { 0500xx00 AAAA }
Bu asagidaki config sizinkisi olsun
#
M: { ahmet.dyndns.biz { DEEB0001 }}
#
D: { mehmet.dyndns.biz { 2499 2499 { ABCD0123 { 6 6 }}}}
Bu config de arkadasinizinkisi olsun
#
M: { mehmet.dyndns.biz { ABCD0123 }}
#
D: { ahmet.dyndns.biz { 2499 2499 { DEEB0001 { 6 6 }}}}
Neticede bu örneklere göre kenidiniz yapabilirsiniz,sizin icin en önemlisi
M olan yere kendi dynadresinizi ve passi nizi yazmanizdir
D olan yere ise Paylasim yaptiginiz kisinin dyn adresi paylasimda kullandiginiz port ve arkadasinizin passi
Newcs2gbox yapmak icin gereken dosyalar
Bin / cs2gbox/newcs/gbox chmod 755 olacak
Keys /cs2gbox.cfg/cwshare.cfg/gbox_cfg/softcam.cfg
var/tuxbox/config/newcamd.conf/newcs.xml
gemingin icin
script/ g.box dosyasi chmod 755 olacak
hydra icin
smartcam.config
Var/keys
cs2gbox.cfg
# Options
# print infos/errors
# | print Hello
# | | print ecm/cw
# | | | print CW's
# | | | | try to reconnect imidiatly after lost connection
# | | | | | print on screen
# | | | | | | print into debug.txt
# | | | | | | | on callback reconnect after 30 seconds
# | | | | | | | | on login failed, retry afer 5 seconds (only 1 time)
# | | | | | | | | | try to connect to unconnected server every hour (3600 seconds)
# | | | | | | | | | | minimum time distance (in seconds) between login's (force login delay)
# | | | | | | | | | | | keep internet alive every 360 seconds
# | | | | | | | | | | | | ping cardservers (keep alive) every 360 after last activity
# | | | | | | | | | | | | | connect timeout
P: { 01 00 01 00 01 01 00 30 05 3600 05 360 360 1 }
# ignore
# caid provider = for all systems except via
# ca provider = for viaccess
#
# My dbox2 password
M: { 192.168.1.10 { 33345679 }}
# passcs2gbox
# Internet Friends port range password cod
D: { 192.168.1.10 { 6668 6667 { FFFF0001 { 4 4 }}}} dns.deki özel sifren geliyor
#passligneMcwshare.cfg de_Dreambox ou Serveur
# name dns/ip port user pass callback configkey
#C: { cardserv 192.168.1.10 10001 local local 12000 01 02 03 04 05 06 07 08 09 10 11 12 13 14 } newcamda mg_camda ve evocamda verilenleri bu sekil ekliyorsun
C: { cardserv 192.168.1.10 24011 local local 12000 01 02 03 04 05 06 07 08 09 10 11 12 13 14 }
# Slot1
C: { cardserv 192.168.1.10 24010 local local 12000 01 02 03 04 05 06 07 08 09 10 11 12 13 14 }
# Slot2
Var/keys
Cwshare.cfg
#
I: { 06 }
X: { 0A }
N: { 01 01 03 00 4000 6000 }
# password
M: { 192.168.1.10 { FFFF0001 }} dns özel sifre
# Internet Friends port range password cod
D: { 192.168.1.10 { 6667 6668 { 33345679 { A4 A4 }}}}
alıntıdırKod:var/tuxbox/config/ icine editlenecek newcamd.conf # /var/tuxbox/config/newcamd.conf # # this is the configfile for MGCamd with NewCS!!!! # # # What Demux API is used? (1 = very old, 2 = rel (Dreambox), 3 = head (VDR)) DEMUX_API = 2 # on PPC version: What Box is used? Valid options are DBOX2, DM7000 and DM5600 # on I386 version this parameter is ignored BOX_TYPE = DM7020 # Which device for writing control words should be used? # Valid options are CA, SDEV or GTX # (SDEV and GTX = /proc/bus/gtx, CA = /dev/caX or /dev/dvb/card0/caX) CONTROL_WORD_DEVICE = CA # What CA0 API is used? # 3 for recent DVB-S driver or recent Dreambox drivers (dream.o from 1.07.3) # also for ca1 use on dbox2 # 2 for older Dreambox driver (ca.o or dream.o up to 1.07.2) # no effect on PPC version if CONTROL_WORD_DEVICE = GTX or SDEV CA_API = 3 # output control words to /proc/bus/gtx in 16 byte or 4096 byte packets # no effect on I386 version or on PPC version, if BOX_TYPE = DREAMBOX GTX_OUTPUT_MODE = 16 # This is important for channels which frequently change between free and # encrypted broadcasts. The change will be reflected in the PMT. If you # don't want your picture to stop when the channel goes from free access # mode to encrypted mode, either your zapper (zapit/Enigma) or newcamd # itself has to keep track of PMT changes. Recent Enigma versions do this, # so you can set PMT_UPDATE_WATCH to no. Recent Zapit versions also have # this option, but it is not compiled by default. So when using Zapit # without PMT updates, you need to enable newcamd to monitor the PMT # (PMT_UPDATE_WATCH = yes). Having both zapper and newcamd monitor # the PMT at the same time, can lead to all kind of instabilities and # should therefore by avoided, even if it seems to work at first. PMT_UPDATE_WATCH = yes # Use emulator? EMU = yes # if both control word server and emulator keys are available for the # channel, which method should be tried first? PREFER_EMU = yes # deactivates the dbox2 Betacrypt CAM # this has to be set to yes on Dreambox DISABLE_CAM = yes # use dbox2 Betacrypt CAM for caids 06, 17 or both (00)? CAM_CASYS = 17 # Autoupdate for Emu and Control Word Servers # AU is always yes if there are Betacrypt UDS control word server # connected to newcamd AU = yes # # newcamd debug options # # dumps all ca systems used by a channel on the console SHOW_ALL_CA_SYSTEMS = no # On Screen Display, neutrino, enigma or none OSD = none # Recent Enigma versions come with a new option "Use http authentication" # in the Expert Setup menu. If this option is enabled, the Enigma web server # requires all clients to authorize themselves with username (root) and # password (usually dbox2 or dreambox). The following option tells newcamd # about the authentication username and password to use for the web server # in order to be able to display its on screen information. OSD_WEB_LOGIN = root:dreambox # print debug messages about ECM handling DEBUG_ECM = yes # print debug messages about EMM handling DEBUG_EMM = no # print debug messages about Control Word Server (CWS) DEBUG_CWS = yes # print debug messages about dbox2 CAM (cam-alpha.bin) DEBUG_CAM = yes # print command message to/from dbox2 CAM as hex strings DEBUG_CAM_HEX = no # print all plain control words used SHOW_CW = no # hex dump of entire PAT SHOW_PAT = no # hex dump of entire PMT SHOW_PMT = no # hex dump of entire ECM SHOW_ECM = no # hex dump of entire CAT SHOW_CAT = no # hex dump of entire EMM (AU) SHOW_EMM = no # show network ECM messages being sent and received from/to the cardservers SHOW_CWS_ECM = no # show network EMM messages being sent and received from/to the cardservers SHOW_CWS_EMM = no # hex dump of EMMs with wrong signature EMM_REPORT_WRONG_SIG = no # delay between channel zap and appearance of the OSD OSD_WAIT_TIME = 2000 # # newcamd optional settings # # Delay between reception of new control word and writing them into # the CSA registers # this is a default, can be changed for each individual key in keylist DEFAULT_CW_DELAY = 500 # reload config on every channel zap RELOAD_CONFIG_ON_ZAP = yes # reload keylist on every channel zap RELOAD_KEYLIST_ON_ZAP = no # write osd ca info to file # CA_INFO_FILE = /tmp/cainfo.txt # # newcamd mandatory settings for control word servers (cws) # # Cardserver list # # <hostname> <port> <username> <password> <14 byte triple-des key in hex> <lan/wan> <cardserver name> # # wan connections will be dropped and rebuild if newcamd is told so by camdcmd # (see admin options) # # hostname = uds to use betad, port is the serial port in that case # #CWS = uds 1 premiere premiere CWS = 127.0.0.1 24010 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcs CWS = 127.0.0.1 24011 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcs CWS = 127.0.0.1 24012 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcs # # newcamd optional settings for using control word servers (cws) # # Timeout for cardserver login in 100ms CWS_CONNECT_TIMEOUT = 20 # Port to listen for incoming cardserver connections (reverse login) # and/or admin connections CWS_INCOMING_PORT = 12000 # Port to get a list of all connected cardservers, just telnet to it CWS_DEBUG_PORT = 12001 # # newcamd admin control options # (incoming port is the same as CWS_INCOMING_PORT) # # <password> <14 byte des key> # ADMIN_PASSWORD = secret 00 00 00 00 00 00 00 00 00 00 00 00 00 00 P.S. port 24010 et 24011 cs2gbox var/tuxbox/config/ icine editlenecek Newcs.xml <?xml version="1.0"?> <!-- For setup-issues, look in readme.txt! If there are other troubles, try different forums or irc channels around :o) --> Var/ <newCSconfig> <readers name="Card Readers"> <device> <name>lower</name> <type>Sci</type> <node>/dev/sci0</node> <export>yes</export> <enabled>yes</enabled> <blocksa>No</blocksa> <blockua>No</blockua> <blockga>No</blockga> <boxkey>0000000000</boxkey> <PTShandshake>no</PTShandshake> <crypto-special>no</crypto-special> <carddetect>yes</carddetect> <newcamd_port>24010</newcamd_port> <priority>round</priority> <sid> <allow> <!-- valid value for id are: 4 numbers, if the service id is 3 numbers, add a 0 infront of it. --> <id></id> </allow> <deny> <!-- valid value for id are: 4 numbers, if the service id is 3 numbers, add a 0 infront of it. --> <id></id> </deny> </sid> </device> <device> <name>upper</name> <type>Sci</type> <node>/dev/sci1</node> <export>yes</export> <enabled>yes</enabled> <blocksa>No</blocksa> <blockua>No</blockua> <blockga>No</blockga> <boxkey>0000000000</boxkey> <PTShandshake>no</PTShandshake> <crypto-special>no</crypto-special> <carddetect>yes</carddetect> <newcamd_port>24011</newcamd_port> <priority>round</priority> <!-- hard is default --> <sid> <allow> <!-- valid value for id are: Gültige Werte für caid: 4-stelliger DVB-CAID Code 0500 - Viaccess 1/2/TPS-Crypt 0B00 - Conax 0100 - Seca 1/2 0919 - Sky Italia NDS 0911 - Viasat NDS 0960 - Sky UK 0961 - Sky UK 1702 - Premiere Sat Aladdin 1722 - Premiere Kabel Aladdin 1762 - ORF/ATV+ Betacrypt 1800 - Nagravision 1 1801 - Nagravision 2 0D02 - UPC Cryptoworks 0D05 - ORF/ATV+/easy.tv Cryptoworks 4A70 - Dreamcrypt 0606 - Irdeto 1 0602, 0604, 0606, 0608, 0622, 0626 - Irdeto 2 4AD4 - Omnicrypt 4A60, 4A61, 4A63 - Skycrypt 4AD0, 4AD1 - X-Crypt --> 4 numbers, if the service id is 3 numbers, add a 0 infront of it. --> <id></id> </allow> <deny> <!-- valid value for id are: 4 numbers, if the service id is 3 numbers, add a 0 infront of it. --> <id></id> </deny> </sid> </device> <device> <name>phoenix</name> <type>phoenix</type> <node>/dev/tts/0</node> <mhz>357</mhz> <export>yes</export> <enabled>yes</enabled> <blocksa>No</blocksa> <blockua>No</blockua> <blockga>No</blockga> <boxkey>0000000000</boxkey> <PTShandshake>no</PTShandshake> <crypto-special>no</crypto-special> <carddetect>yes</carddetect> <newcamd_port>24012</newcamd_port> <priority>round</priority> <sid> <allow> <!-- valid value for id are: 4 numbers, if the service id is 3 numbers, add a 0 infront of it. --> <id></id> </allow> <deny> <!-- valid value for id are: 4 numbers, if the service id is 3 numbers, add a 0 infront of it. --> <id></id> </deny> </sid> </device> </readers> <radegastserver> <!-- valid value for enable are: 0,1 - Enable or Disable radegast server. --> <enabled>no</enabled> <!-- valid value for port are: 0,65535 - Which port to listen for incomming connections. --> <port>10001</port> <!-- valid value for allow are: ALL - Not active yet. --> <allow> <hostname>127.0.0.1</hostname> </allow> </radegastserver> <cache> <emm>10</emm> <ecm>10</ecm> </cache> <debug> <level>normal</level> <type>init</type> <output>all</output> <logfile></logfile> <console_options></console_options> <file_options></file_options> <udp_host>192.168.1.10</udp_host> <udp_port>1000</udp_port> <udp_options></udp_options> <tcp_port>3001</tcp_port> <tcp_options></tcp_options> </debug> <newcamdserver> <enabled>yes</enabled> <name>newcs</name> <deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey> <userfile>/tmp/users.txt</userfile> <user> <name>local</name> <password>local</password> <au>on</au> <allow>lower</allow> <!--Use this just when you want give free just some readers to your Users --> <allow>upper</allow> <allow>phoenix</allow> <!--Use this just when you want give free just some readers to your Users --> </user> <user> <name>User1</name> <password>Pass1</password> <au>on</au> </user> <user> <name>User2</name> <password>Pass2</password> <hostname>192.168.1.10</hostname> <!--Is just for Reverse Login needed --> <port>14445</port> <!--Is just for Reverse Login needed --> </user> </newcamdserver> </newCSconfig>
Konu Vodk@Orange tarafından (02-02-2007 Saat 14:52 ) değiştirilmiştir.
Güzel anlatim arkadas ama gbox_cfg ayarlari?
Sonra oomatikmen dream yüklemeye yapilinca chmod ayarlarida mi yapiliyor?
Aykocan (26-10-2007)
Aykocan (26-10-2007), utuzgu1973 (04-03-2008)
indirilen dosyalar gbox klasörünemi atılacak
birde router dediğin şey ne bi çeşit proğrammı yoksa sitemi burayı biraz açıklarmısın
Konu Nisan_yagmuru tarafından (10-07-2007 Saat 14:31 ) değiştirilmiştir.
Aykocan (26-10-2007)
Aykocan (26-10-2007)
Aykocan (26-10-2007)
Aykocan (26-10-2007)
bu konularda biraz acemiyimde kusura bakmayın birşey sorucağım elimdeki orjinal kartı dreambox ta cc cam ile seyredebiliyorum fakat gbox u çalıştırınca kanallar açılmıyor ben bu kartı gboxta çalışmazken nasıl paylaştırıcağım gbox ta bilgilendirirseniz sevinirim
oz@ (27-10-2008)
arkadaslar kusura bakmayın mesela bende 3 adet kart var diyelim bunları paylaşıma acmak için pc mi daha iyi olur yoksa dream cihazlarmı daha iyidir pc ile paylaşım yapacaksam pc 7 gün 24saat açık olmak zorundamı bide paylaşım verceğim kişilerin hepsine ayrı ayrı port ve ayrı ayrı host almak zorundamıyız bide kime paylaşım verdiysem ben kendi pcmden görebililirmiyim kaç kişinin online olduğunu kusura bakmayın arkadaşlar yardımlarınızı rica ediyorum acemiyim neolur bağışlayın
esber (27-08-2008)
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks